OK....OK.....I saw the thread where everyone was speculating regarding my whereabouts for the past few days. Here is the deal. I was out of space and had a 6' wide printer that I needed to find a place for. So, I moved a wall in my shop about 12' and added about 150 square feet to my shop. I'm including some pictures to show you what it looks like now in case anyone wondered.

I spent all day today getting trained to operate the new vinyl printer/plotter. Tomorrow I will start getting caught up on decals, wraps, bows, and arrows.:D

I moved my work space clear across the shop, so my DSL cable is too short to go up into the ceiling and back down to my pc. That is why I haven't been answering PMs very well. I went to bed at 3am on sunday night and 1am on Monday night and 1am on Tuesday night, so I haven't felt like coming in the house and answering PMs....

First picture is standing at the door looking toward my work space.

http://i243.photobucket.com/albums/ff90/jcmorgan31/shopfirequiver010.jpg

Nest is from my workspace looking toward my display wall. Kinda looks bare now that I have so much more wall space. My work space used to be where the bows are hanging on the left.

http://i243.photobucket.com/albums/ff90/jcmorgan31/shopfirequiver012.jpg

Next is from where the bows were hanging shooting down my test range. This is where I master my 8 yard game....:rockon:

http://i243.photobucket.com/albums/ff90/jcmorgan31/shopfirequiver013.jpg

Last is a picture within my workspace of my new printer/plotter. I'm ready to pump out wraps, decals and banners like a mad man...:thumb:

http://i243.photobucket.com/albums/ff90/jcmorgan31/shopfirequiver011.jpg


So now you know where I've been. I'm still not completely resettled, but I'm close enough to try to get caught back up. I appreciate everyone's patience!!!

So you will be getting to my DEDALS soon.....:tape:

LOOKS GOOD, by the way......:rockon:

nice looking shop jc. you still want this 452 I have for a display?

So you will be getting to my DEDALS soon.....:tape:

whats a DEDAL?.....:tape: :noidea: :D

nice looking shop jc. you still want this 452 I have for a display?

I still have your cable hanging on the wall......haven;t built the string yet...:doh:

So you will be getting to my DEDALS soon.....:tape:

Which dedal am I supposed to be making??? :noidea:

I still have your cable hanging on the wall......haven;t built the string yet...:doh:

I havent given you serving lengths yet. my bow press has been broken and I just got a new portable one to use. I'll measure it and get the stuff out to you in a day or two.

I havent given you serving lengths yet. my bow press has been broken and I just got a new portable one to use. I'll measure it and get the stuff out to you in a day or two.


I'll finish the string when the stuff arrives....:biggrin1:

Nice shop Justin! It's actually a LOT bigger than I thought it'd be.

I have to say it's also the CLEANEST and most uncluttery shop I think I've ever seen! Nice place!

I'm drooling over the mega plotter! So that means you could do full body panel stickers (we just did several of them for cars here at work...they look incredible!)....OR...easily create one piece wraps for arrows and LOOOONG stabs!

First class setup, man....first class.

Just out of curiosity...if someone wanted full vinyls for signage (like say...for a shop window...or car panels as I mentioned) is that a different type of vinyl you use so it won't fade.....or is it a different machine altogether that does the long life stuff? (pardon my ignorance...it's too big to avoid).

Nice shop Justin! It's actually a LOT bigger than I thought it'd be.

I have to say it's also the CLEANEST and most uncluttery shop I think I've ever seen! Nice place!

I'm drooling over the mega plotter! So that means you could do full body panel stickers (we just did several of them for cars here at work...they look incredible!)....OR...easily create one piece wraps for arrows and LOOOONG stabs!

First class setup, man....first class.

Just out of curiosity...if someone wanted full vinyls for signage (like say...for a shop window...or car panels as I mentioned) is that a different type of vinyl you use so it won't fade.....or is it a different machine altogether that does the long life stuff? (pardon my ignorance...it's too big to avoid).

It uses solvent ink and heat to print. The product that comes out is outdoor grade vinyl and will not fade for at least 3 years. I can make decals, banners, t-shirt transfers (1400 dpi resolution transfers), signs, posters, printed card stock for packaging, etc. It can be used as a stand alone printer, a stand alone cutter, or both at the same time.

It will pretty much do it all.

It uses solvent ink and heat to print. The product that comes out is outdoor grade vinyl and will not fade for at least 3 years. I can make decals, banners, t-shirt transfers (1400 dpi resolution transfers), signs, posters, printed card stock for packaging, etc. It can be used as a stand alone printer, a stand alone cutter, or both at the same time.

It will pretty much do it all.
It slices, It dices, It chops but did ya get the set of matching steak knifes?.... :noidea:

It slices, It dices, It chops but did ya get the set of matching steak knifes?.... :noidea:

No steak knives....:noidea:

For the price, you'd think I'd get something free though.....a shirt....a hat....a barbeque set or something....:biggrin1:

Nice lookin shop! I need to find a good shop to hang out in again :bored: :D

hey Morgan, where is your Maphews bows......:noidea:

how can you be a real shop wid out em??:hug:

hey Morgan, where is your Maphews bows......:noidea:

how can you be a real shop wid out em??:hug:

:lol: :lol: :lol:

:lol: :lol: :lol:

he is gonna make me pay fur dat one......huh foo....:noidea:

he is gonna make me pay fur dat one......huh foo....:noidea:

No doubt. :nod:

Looking good!!! I'll be sending the string orders soon:rockon:

Ah... new printer...ok slacker... send me a price on about 6 banners
approx 2ft by 6ft with metal grommets with sewn edges and shipping to me.:rockon:

Ah... new printer...ok slacker... send me a price on about 6 banners
approx 2ft by 6ft with metal grommets with sewn edges and shipping to me.:rockon:

the way you 2 answer pm's sometimes, I can imagine how long this will take....

:lol: :lol:

hey Morgan, where is your Maphews bows......:noidea:

how can you be a real shop wid out em??:hug:

All those bows were Mathews. I just rubbed them with some acetone and a rag and there were Martins underneath.....:noidea: :biggrin1:

Can you make banners now?

Shop looks good Justin. :rockon:

Can you make banners now?

Shop looks good Justin. :rockon:

Yep. 28" x whatever. :thumb:

Nice lookin shop there Justin. Hope you put that printer/plotter on some skids so when the floods come it will be safe.:tape: :D

Nice lookin shop there Justin. Hope you put that printer/plotter on some skids so when the floods come it will be safe.:tape: :D

No worries. The stand keeps it 3' off the floor..... :)

All those bows were Mathews. I just rubbed them with some acetone and a rag and there were Martins underneath.....:noidea: :biggrin1:

:lol: :lol: :lol:

Yep. 28" x whatever. :thumb:

thats freakin' sweet! I may have to get some sample pics from ya and hook it up. :rockon:

Yep. 28" x whatever. :thumb:

so technically speaking.........we could build a wind break for SLIPPY out of banner material???


what would it say??? NO WIND HERE??:lol:

what would it say??? NO WIND HERE??:lol:

Whhhhoooooshhhhh? (sound of the arrow zipping past)

Or maybe a picture of a buck with a big 'X' labelled "vitals" about 6" in front of the deer's chest? :noidea: