what brand of peep and size do you use for

hunting

3D

NFAA


Indoor


or do you use just one for all


I use a tru peep in the 1/4 inch size for all

hunting-mega-peep
hooded for everything else.

3D/Indoor: Specialty peep with #2 clarifier (I have 6x scope)
Hunting: G5 3/16"

Been using one for many years.

For most tournament I use the 1/16" size

Hunting I use the 1/8" size.

Been using one for many years.

For most tournament I use the 1/16" size

Hunting I use the 1/8" size.

I use the Tru-peep in some bows, and a super ball peep in others......

I have a no-name (Eastman ?) 3/16" peep with silicone tubing for hunting and Super Ball peeps for everything else.

Ron

I use the 3/16 fletcher peep, But I want to go 1 size smaller. What size would that be 1/8?

I use the 3/16 fletcher peep, But I want to go 1 size smaller. What size would that be 1/8?

Yes unless you use a Super Ball peep. I believe they have some sizes in 1/32 increments. So you could possibly use a 5/32". Another thing you could do is drill out a 1/8 peep to 5/32 without compromising the integrity of the peep material.

Ron

i have had great luck with the G5 meta and true peeps.

I like the Mega hunter,its easy to pick up the site & target in low light...Cant beat it...

Meta peeps for all but hunting for that I use some no name rubber tubing one

I am a recent convert to the SuperPeep and then I can change the hole size to fit what set up I am shooting. These peeps are now on both my 3D setup (Constitution) and my field set up (Apex7).

http://www.specialtyarch.com/peeps.asp

or

http://www.obsessionarchery.com/peep-sights-c-83.html?osCsid=bf46b0eeab43c7438d49400dd882f60c

Yes unless you use a Super Ball peep. I believe they have some sizes in 1/32 increments. So you could possibly use a 5/32". Another thing you could do is drill out a 1/8 peep to 5/32 without compromising the integrity of the peep material.

Ron

Thanks Ron I may give that a try.:peace:

super ball peeps with different apertures depending on what I am doing....mostly keep the 3/32 in for hunting and 3d with my hunting rig.

Hook, How does that 3/32 line up with a 1 5/8 site housing?

Hook, How does that 3/32 line up with a 1 5/8 site housing?

Well mine is 1.75 and it is fine....no problem seeing all the pins. Of course they are .010 pins :rockon:

Well mine is 1.75 and it is fine....no problem seeing all the pins. Of course they are .010 pins :rockon:

I only have to see 1 pin on my HHA so that should be easy:laugh: