LABLEVENS
11-15-2006, 08:14 PM
I install a new sight,the bow is shooting high I max out the vertical adjustment and it did come down about half way.What can I do to bring it down more ?:doh: :doh: :doh: :doh: "HELP"
|
View Full Version : Need Help LABLEVENS 11-15-2006, 08:14 PM I install a new sight,the bow is shooting high I max out the vertical adjustment and it did come down about half way.What can I do to bring it down more ?:doh: :doh: :doh: :doh: "HELP" Frank 11-15-2006, 08:24 PM What type of sight? When you say you maxed out vertical adjustment, was this on the sight pin or the sight housing itself? How high is your arrow shooting? Is your bow tuned to the arrows you are shooting? Before changing sights, were you shooting good? Maybe post a picture of your set-up. LABLEVENS 11-15-2006, 08:40 PM Frank,its a spot-hogg hunter and the adjustment was done on the houseing.It started 10 in. hight got it down to 3-4 in.Would like to bring to housing back to center do I raise or lower peep or adjust rest BUNNYMAN 11-15-2006, 09:29 PM Frank,its a spot-hogg hunter and the adjustment was done on the houseing.It started 10 in. hight got it down to 3-4 in.Would like to bring to housing back to center do I raise or lower peep or adjust rest is your anchor point low???? had a guy that had the same problem as you and it turned out to be his anchor point being very low..... So correct me if I am wrong but moving your peep up would help I think..... LABLEVENS 11-15-2006, 09:42 PM Thanks folks brokenarrow 11-15-2006, 09:50 PM So correct me if I am wrong but moving your peep up would help I think..... Okay, if your hitting high move the sight up or the peep down. Like a rifle, move the front sight in the dirrection of where you're hitting or the rear sight in the dirrection you want to hit. BUNNYMAN 11-15-2006, 09:58 PM Okay, if your hitting high move the sight up or the peep down. Like a rifle, move the front sight in the dirrection of where you're hitting or the rear sight in the dirrection you want to hit. just move it back and forth till you get it....just to get this guy off my back.... brokenarrow 11-15-2006, 10:29 PM just move it back and forth till you get it....just to get this guy off my back.... You got a guy on your back? Is he a big guy? Doesn't that make you tired? brokenarrow 11-16-2006, 06:50 AM correct me if I am wrong ....... You were, so I did.....:tongue1: Ronhop 11-16-2006, 08:21 AM The peep is probably too low, making the anchor point too high, making the sight elevation adjustment bottom out. Close your eyes, draw the bow, settle into a comfortable anchor, open your eyes... Where's the peep ? I'll bet it's too low. Good luck. Ron papito 11-16-2006, 09:25 AM Ronhop's trick works i had the same problem. Ronhop 11-16-2006, 03:36 PM So did I. I didn't want to admit it though. You forced me to. Goes to show you that you generally learn from your mistakes... Generally.... :laugh: Ron |