After talking to a few people about my current maxima 350's being stiff A member from another forum offered to send me some 250's to try out. I went to Carbon Express's arrow selection guide and it seems that I have a 1" window between a maxima 250 and 350 for me to use the maxima 250. the chart says my total arrow length should not exceed 27" . For me to do that I would have to cut my 250 down to 25 1/4" then add a nock which will add 3/4" and my tip which will be approx 1" to reach 27" maximum. I will be getting a TR Drop zone and with my 27" DL will that arrow be to short to be shot with my setup? Also with my arrow shaft being shorter will my arrows still be on the stiff side?