You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 10 of 10

Thread: Need some help

  1. #1

    Default Need some help

    Just signed up first time to post. I need some help on finding out what bow length I need. ( to give you a little back-grown on my self) I am 68 years I have a good place to bow hunt & would like to give it a try. Not being as strong as you young guys, I will be using a bow lock so I can preload. The problem I have run into I bought a 29" draw bow that was to long for me, that I have returned. My question, how can I measure my draw length so I will know what size to buy?

    Thanks

  2. #2
    Junior Member
    Join Date
    Mar 2006
    Location
    Lakeside, Tx
    Posts
    17

    Default

    The best advice I can give you is to go to a bow shop.
    They can mesure you and fit a bow to you. You can also
    try out different bows. As for draw weight you would be surprised at
    what you can do with bows now days. I have seen some bows with
    minimal draw weights that shoot incredibly fast. Best of luck.

  3. #3
    Member
    Join Date
    Mar 2006
    Location
    NW Iowa
    Posts
    61

    Default Which bow?

    I agree, a good bow shop will work with you, finding the right bow and the right draw length to match. If your worried about a high poundage bow, say 63 lbs, being too much for you. I suggest trying the PSE firestorm lite (single cam). I've had guys with shoulder problems come in looking for a light poundage bow (40-50lbs), they can't believe it when they pull this bow back at 63lbs, too them it feels 15-20lbs lighter. Give it a try if you can find one, just take it easy the first time you try. Also, make sure the lock is legal where your at.
    Keith
    NBEF Instructor
    South Dakota - Iowa

  4. #4

    Default

    Thanks 3D & crawdad. The problem with going to a bow shop is theres not one close to me. I would have to drive 80 miles. I was hoping I might could but my arms in the position like I was pulling back a bow & measure from a certain part of both hands to get the measurement I need. I checked with parks & wildlife the lock is legal.

    Thanks for the help.

  5. #5
    Story of my life Radar's Avatar
    Join Date
    Oct 2005
    Location
    N. Illinois
    Posts
    851

    Default Draw length

    In another thread about a week ago Chris said to get ya close on your draw length measure your wingspan finger tip to finger tip then divide by 2.5 I have seen other people do this also and it gets ya pretty close.
    Target: Hoyt ProElite XT3000 C2, 60# 30", CBE Quad Lite, CBE 3x .019, Trophy Taker, Easton Fatboy 400's(indoor) lightspeed 400 (outdoor)

    Hunting: 2009 Alphamax35 (Blacked out) 70#, 29", HHA Slider, Bisquit, Easton ACC 3-60, Rage 100 gr. 2 blade

  6. #6

    Default

    Thanks Radar. Using that information I came up with a 25" draw length. I feel that will put me very close. With the 29" draw my arms was way to short, so the 25" may be right on.

  7. #7
    Senior Member
    Join Date
    Jul 2004
    Location
    Middletown, Pa
    Posts
    812

    Default

    Quote Originally Posted by Dennis Meyer
    Thanks Radar. Using that information I came up with a 25" draw length. I feel that will put me very close. With the 29" draw my arms was way to short, so the 25" may be right on.
    Try to choose a bow that has some adjustment to it, too. I find that the wingspan/2.5 works out pretty close. Not always right on and that's why I suggest a bow with some adjustment, usually with a rotating module.

    A couple bows that come to mind are some made by Browning. Also some of the better ones with this feature are made by Hoyt/Reflex with their Cam+ 1/2 and Martin bows with the Tru-Arc+ or Nitrous cams. These you can adjust, if necessary, without the use of a bowpress so not real need for a shop that you say isn't close by.

  8. #8

    Default

    Thanks bfisher. Sorry it took me so long to get back to you. I ordered a Browning Rage RH 21-31 65#. Information on it says easy to adjust length with out bow press. Do you know anything about adjusting this bow? If anyone else knows any thing about this bow, I can all ways us the help.

    Thanks

  9. #9
    Senior Member
    Join Date
    Jul 2004
    Location
    Middletown, Pa
    Posts
    812

    Default

    Dennis,

    I think you probably have the dual cam model and it's easy to adjust. Looking at the side of the cam it should have a set-screw or cap-screw holding the module in place. All you need to do for adjustment is remove the the screw and rotate the module to another position. Do both modules the same. To make the draw longer you rotate the module toward the string; shorter the other way. Don't worry about screwing the bow up. You'll figure it out. Just make sure of two things---#1 do both cams the same, and #2 just don't cross-thread the set-screws.

    You rowner's manual should explain all this anyway. Good luck.

  10. #10

    Default

    Thanks bfisher. If I have a problem after I receive my bow, I will be back asking for more help.

    Thanks to all you for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •