Thread: 3D arrows!
06-14-2006, 11:53 PM #1
- Join Date
- Feb 2006
What do you guys think?
..Gold Tip XCutter Pro Ultralight
..Gold Tip Ultralight Pro
06-15-2006, 08:14 AM #2
All nice arrows though I have been hearing alot of bad stuff about GT arrows lately so if I had to choose between those three I would go with the Easton Fatboys they just fly so great out of my XT.
06-15-2006, 10:04 AM #3
- Join Date
- Apr 2006
I must agree with Frank on this one, I have used Fatboys all season long for targets and they work really well. I am not much on speed, I am more for accuracy. That being said, I am getting 260 fps at 58lbs with my Fatboys and it does not bother me one bit. I shoot in the hunter class out to 40 yards and get good arrow flight with them. I shoot them with a 05' Switchback and would not trade arrows at this point, I seem to be hitting dead on with them. Try your local archery shop, most of the time they will have some that you can try and see how they shoot out of your bow. Do your own tests, such as thru paper and a chronograph, even see how they group at the archery shop. Just a little food for thought. Goodluck on finding that right target arrow.Switchback 28"
Scott Longhorn III
Easton Fatboy 400 (344 grains- 260fps@58lbs)
Specialty Archery Superstix
NAP Drop way
Spot Hogg Sights
"A bad day of target shooting is still better than a good day of work".
06-15-2006, 10:24 PM #4
Dont forget CX Linejammers.....
Great flying arrow...
Got a question, Easton Fatboys....Glue in tips or screw in?I cut things up and split them down!
06-16-2006, 12:10 AM #5
- Join Date
- Jan 2006
I use Fatboy 400s, 27.25 long with 85 grain glue ins, and 2.25 in quick spins. shoot indor 300 rounds, indoor and out door 3d out to 60 yards, shooting 284 fps out of a 64 lb trykon, lovem!!!! Great flight, groups and good speed!!!
06-16-2006, 02:23 AM #6
im shooting the gold tip hunter pro shaft 55/75
its what i do 3d and hunt with
they are 8.2 grains per inch and .001 straightness
never had a problem with them06 mathews switchback xt 70# 27"
drop away rest
goldtip 55/75 28" 100 grain tip 377 tg
yardage master sight
speed kills (me and my mathews can prove it)
06-16-2006, 10:30 AM #7
Glue in tips or screw in?
I use inserts and screw in tips with all my arrows have never been real sure what the benefit is of glue in tips. Unless you are just trying to lighten the weight of your arrow????????
06-16-2006, 01:22 PM #8
Goldtip xcutters work for me
80yrds getting ready for a field event.
06-16-2006, 01:25 PM #9
Now cut them short
28 1/2 draw
Arrows are 27"
2.3vanetec vanes slight right
320 grn total
Out of my Mathews Apex 7 with Trophy Taker rest. These arrows work
06-16-2006, 01:25 PM #10
06-16-2006, 11:25 PM #11
first off I must say nice shooting as I dont want anyone jumping on me for something I might say later in the post
My question about the glue in tips was because the 12ringme said he shot in the hunter class, around here glue in tips are a no no in hunter class.
The biggest advantage I find w/them is your tips never get loose. I laugh when a guy has a loose tip and he tightens it while the arrow is still on the string, I am sure he didnt turn that nock at all right?
The other advantage is its a hundred grain head, not a hundred grain head and a ten grain insert.I cut things up and split them down!
06-17-2006, 04:50 PM #12
Nice shooting there DB. No glue-ins allowed in hunter class here either. So guys is there any real advantage to glue-ins over screw-ins? Just wondering.