Thread: Sight pins/lined with arrows
08-12-2006, 02:24 PM #1
- Join Date
- Jan 2006
Sight pins/lined with arrows
I have noticed that my arrows(field tips) are not in line with my sights.I have noticed other people that I shoot with, their sights and arrows are lined perfectly. I can group very well with my shots out to 50 yds. However, I was wondering if this was common, or maybe I have some tuning to do?
08-12-2006, 03:18 PM #2
Out of tune
i would say your bow is out of tune go to your local bow shop and they can help youtru-glo 5-pin sight
Doinker Shorty A-bomb
Easton LightSpeed 500s 6.5GPI
100 Gr Muzzy-Bad to the bone-!!
Bowhunters get more penatration!!!
08-12-2006, 08:38 PM #3
In most cases, when you put an arrow on the string and look down the string aligning the arrow, the sight pins will be slightly off to the left compared to the arrow. (This is for a right handed shooter)
Rarely will the pins be lined up exactly with the arrow. The reason they will not is the bow torque caused by the cable guard when the bow is at full draw.
When the bow is drawn, the cables put more pressure on the cable slide. This will cause a small amount of torque in the riser. The cable guard gets pulled in toward the arrow at full draw. This is normal. The exception would be a shoot thru bow system like the martin razor-x would not have this torque at all.
I hope this makes sense.
08-12-2006, 10:15 PM #4
Just a question, does the roller guard on the Mathews do this??? shorter and a little stiffer than the round rod style???I cut things up and split them down!
08-13-2006, 02:22 AM #5
- Join Date
- Jul 2004
- Middletown, Pa
I should let Chris answer this question about the roller guard, but I'm already typing.
Yes, the roller guard on the Mathews bows creates side torque. It's pulling the cables to the side is it not?
08-13-2006, 02:06 PM #6
08-13-2006, 08:43 PM #7
I guess I was thinking of all the round cable guards that I have seen actually bend toward the center when the bow is drawn back.....but now that I actually thought about it, it makes sense....sorry for my confusion...I cut things up and split them down!
By wolf942 in forum General Archery ForumReplies: 4Last Post: 03-29-2008, 07:01 PM
By Illustrator in forum Archery Equipment Accessories - Buy Sell TradeReplies: 1Last Post: 03-24-2008, 01:47 PM
By 62flint in forum Beginners Archery RangeReplies: 5Last Post: 07-10-2007, 09:28 PM
By BowLights in forum General Archery ForumReplies: 5Last Post: 03-18-2007, 11:48 AM
By buckkiller_06 in forum Bowhunting forumReplies: 9Last Post: 11-20-2006, 01:31 PM