Thread: FOC- 3D arrows
12-24-2009, 05:39 PM #1
FOC- 3D arrows
...just finished my lightspeeds 400 for 3D,80grains points, X2 vanes..and FOC is 7.2 %. FOC on same arrow with CB insert and 100grain striker, 2" QS ST is 8%.
need opinion ..
will try it to shoot tumoorow
12-24-2009, 06:41 PM #2
Either arrow will be fine for 3D. Ideally target archers like to have thier setups between 7 and 10% FOC. Either of those will work fine.
Since there is only a .8% difference between the two, you will not notice much, if any difference in the two arrows.
good luckTodd Segner
PSE Field Staff, Tru-Ball Releases, HIPS Targets Pro Staff, Any Budget Outdoors Pro Staff,
Rage Broadheads Pro Staff, On Target2 Shooting Staff
01-26-2010, 11:04 PM #3
- Join Date
- Jan 2010
- anderson IN.
I shoot a Monster 6" 27"dl at 64# shooting a CXLSS 250 26.5" long/Blazer X2 vanes/CX Nock/No collar/90 gr. Parabolic target points/320gr. total/10.7%
By Werd in forum Archery Equipment Accessories - Buy Sell TradeReplies: 6Last Post: 01-11-2008, 02:00 PM
By Rgrsldg1 in forum General Archery ForumReplies: 6Last Post: 11-21-2007, 12:47 AM
By jetshowell in forum General Archery ForumReplies: 1Last Post: 10-26-2007, 02:09 PM
By chelleo in forum General Archery ForumReplies: 6Last Post: 07-02-2007, 01:55 PM
By Radar in forum General Archery ForumReplies: 12Last Post: 02-25-2007, 08:30 PM