Thread: Whisker Biscuit???
10-30-2006, 09:57 PM #1
i was looking into replaceing my tiger tough arrow rest and thinking about getting a whisker Biscuit for my bow. Is a whisker biscuit a good rest or is it a waste of money? What do you Think??
10-30-2006, 09:59 PM #2
Good rest, I love mine
Although certain others may disagree w/ me
10-30-2006, 10:08 PM #3
Another question, I shoot aluminum arrows for practice but when i hunt whitetail i use carbon arrows. There is a whisker biscuit for both kinds of arrows, is there on that works on both?
10-30-2006, 10:14 PM #4
10-30-2006, 10:18 PM #5
i dont know Aluminum arrows are just alittle cheaper i guess for just practice
Last edited by runningbear15; 10-30-2006 at 10:21 PM.
10-30-2006, 10:24 PM #6
I always try to practice w/ what I shoot. Do you ever have any tuning issues?
10-30-2006, 10:29 PM #7
I'm really surprised Bowman hasn't chimed in on this thread yet. He is the resident WB hater. I know he can feel us talking about them.
10-30-2006, 11:53 PM #8
I would avoid the missed it biscuit if possible. Try and find a decent drop away!ORANGE COUNTY CHOPPERS
10-31-2006, 12:59 AM #9www.Missouriwhitetails.com
Trophy Rock Pro Staff
Hunt Hard, Hunt Safe, Pass It On
10-31-2006, 01:24 AM #10
I happen to like the WB very much. I also shoot carbon for everything. Drop away rest are not for everyone. I guess the rest you use depends on the person with his wallet open at the cash drawer. If it works for you, that is the important answer. Don't get bullied into buying smething you don't want, trust me it can turn into an expensive lesson learned. Especially from posters on a forum. Unless you see the WB or the other rest you're interested in perform, than I guess we all have two things on this forum. One is an opinion the other is an %&^#***. You have to make the decison on what you want to listen to. Try the equipment or at least find someone that has it and see how it works. First hand knowledge wins over opiniions and %^$#*&^*+'s everyday of the week. Good Luck.
10-31-2006, 07:19 AM #11
Howdy there runningbear15 welcome to the forum. I for one love my WB it has never given me any reason to dislike it. Nice price,easy to tune,full arrow containment,and as an added bonus it PO's a certain Bowman on here. The WB is arguably the best rest on the market for hunting. Some say it is not a good rest for longer ranges but I have shot it out to 50 yards in practice with very nice results. Its a decision you will have to make for yourself, but I would have to say buy one you will not regret it. Good luck to you and again WELCOME to the forum.
10-31-2006, 09:16 AM #12
- Join Date
- Jul 2006
- Saylorsburg PA
11-10-2006, 07:00 PM #13
- Join Date
- Jan 2006
- Maine, USA
Ease of use, security of mind, and accurate enough that at the grassroots level my Bro is placing 2nd and 5th at local 3D events around the State. I placed 4th and 8th, but that is more my lack if ranging experience than the WB.
For highest level competition, a person probably wants something different. But for the cost in terms of hunting/hobbyist 3D/backyard shooting it can not be beat.
I've put hundreds, if not into the first thousand, of arrows through mine and it is showing hardly any wear at all. For those worried about the wear, a replacement disk every year for 5 years still only bring it up to the cost of a high end drop-away, with a lot less tuning issues.
Installing the WB is a breeze compared to most drop-aways for the average DIY'er. I find it hard to believe that for the average person that installing something that needs to tied down and timed with your draw is as easy to install as a fixed rest (prongs/WB).
It certainly wasn't for my Dad and he has 40 years of shooting experience, but only owns one bow at a time and does not get to practice every day on other peoples bows and various set-ups. He had to tweak his Ripcord quite a bit more than he had his NAP3000.
You do need to tune your set-up to use the WB. Any set-up needs to be tuned.
For drop aways it is the buss cable, for prong and WBs, it is the nock/vane alignment.
1. if there is dark markings on the vanes, then the shooter needs to rotate his nock a little more and clear the black bristles.
I've put hundreds of shots through my WB with little, if any, wrinkling. The waves I did get was from the vanes passing through/by the center. Once I figured out how my nock needs to be turned for my draw length, poundage, and arrow specifics... no more waves. No different than a prong rest or the NAP 360. People need to tweak their set-up for best performance.
2. to get rid of the waves there are two well known and noted solutions.
A. pass hot air over them with a blow dryer or candle. NOT close, just enough for them to warm up and straighten out.
B. put them in warm water. The warm water witll also straighten the vanes without melting out the glue.
Just a bit of advice for those worried about using a WB and Wavy Vanes....
To keep the leading edge from catching and peeling back, put a dab of glue on the leading edge.
Lots and Lots and Lots of test show only like a 2-4fps slowdown with WB.
There is no better endorsement than seeing people who make their living shooting a bow (all those hunting programs) shooting the WB as UNENDORSED equipment. On many of those shows you will not see Carolina Archery listed as a sponsor. The WB is the shooter chosen rest. When they need to make the shot that counts, so they can record the kill, put it on DVD, sell it, and put money in their bank, they use a WB.
Having said all that, I am still glancing at that QAD ProLD. All the benefits of a drop away and no cables to mess with if you don't want to. Or if you are in the field and the cable breaks, you just thumb **** it and you don't need to cable to proper release.
Are WBs accurate? As accurate as you are out to 40 yrds definitely.
TR Matrix, WB, and OEM RadialX Vanes - 30yds
The one off to the right hit the nock of one of the other arrows.
TR Matrix (before going with VBG Triangle) and WB - 20yds
VBG Triangle and WB - 30yds
VBG Triangle, WB, and Montecs (prior to BH tuning, was a little right) - 20yds
11-12-2006, 12:19 AM #14
People can say what they want. I love my wisker biscuit!! Oh yeah, I'm a girl I can say that..
11-12-2006, 12:18 PM #15
- Join Date
- Nov 2006
Hi i have just joined the ross family and at the same time purchased a brand new CR34, what a pleasure and a new W/B the arrow slot in type what a pleaser no hazzles at all, i have one question if this is the appropiate forum to ask it.
My dealer set my bow poundage up on the limbs without loosening the limb nock nuts with a hellavu noise on the bolts he managed to get it up to 65 lbs fortunately i was watching the intro dvd whilst he was doing i saw the mistake he made but being a centleman i did not comment on this.
Today i tied with loosenbing the lock bolts set the bow up to 70lbs but to no avail.
My ? is has he done any damage by forcing the limbs and to what extent because i cannot turn the limb bolts the so tight it feels like they have been welded in place, i phoned him and told him he said there can be many things wrong? i must take it to him so he can have a look???????
Please answer i am new to this site and forum please help me to the correct Ross site and if possible can somebody answer my ?
11-12-2006, 08:32 PM #16
drop away, nice and quiet, super accurate...whisker biscuit, freakishly loud, couldnt hit the broadside of a barn...JMODiamond Victory 29"/55#
Gold Tip XT Hunters
Trophy Taker Pronghorn
Copper John Dead Nuts
Muzzy MX4 100 gr.
People Eating Tasty Animals
Remember, a Diamond lasts forever!
By vmabuck in forum Bowhunting forumReplies: 13Last Post: 04-14-2008, 12:48 AM
By trussoni in forum Bowhunting forumReplies: 9Last Post: 03-04-2008, 05:03 PM
By wildchildc1 in forum General Archery ForumReplies: 9Last Post: 01-22-2008, 01:21 PM
By atapro in forum General Archery ForumReplies: 12Last Post: 10-11-2006, 02:29 PM
By coyotekilla20 in forum General Archery ForumReplies: 27Last Post: 08-18-2006, 11:02 PM