You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 8 of 8

Thread: Cam question

  1. #1
    Junior Member Gus Archer's Avatar
    Join Date
    Dec 2009
    Location
    Tulsa
    Posts
    21

    Default Cam question

    If your bow is originally a single cam system can you add another cam to the top limb where the idler wheel is?
    PSE Stinger, Aries sight with light, cobra releases, Goldtip Expedition Hunter 5575, Mongoose quiver, Whisker Biscuit QS arrow rest, Mongo

  2. #2
    Senior Member TMax27's Avatar
    Join Date
    Sep 2008
    Location
    Fairland, OK
    Posts
    778

    Default

    I don't know of a bow that comes from the factory like this. However, I know there are some guys over at Elite Archery Forums who have taken a Rev cam and put it on an Agile to make an Agile SS. I supose you could then take a top Rev cam and use instead of the idler wheel. With FRANKENBOWS, the possiblilies are endless.

    To answer your question, yes you can, but I don't think there are any bows coming out of the factory specifically designed for this.
    2008 Elite XXL 29 3/4" 70lbs- G1 Camo
    2008.5 Elite XLR 29 3/4" 60lbs- Ninja
    2009 Elite XLR 29 3/4" 65lbs- Metallic Red
    2009 Elite GT500 w/ Cuda Cams 25" 47lbs- Pink Ninja

  3. #3
    Junior Member Gus Archer's Avatar
    Join Date
    Dec 2009
    Location
    Tulsa
    Posts
    21

    Default

    Thanks much, that sound great and awesome, ill be lookin into getting some new rev cams with the mods.
    PSE Stinger, Aries sight with light, cobra releases, Goldtip Expedition Hunter 5575, Mongoose quiver, Whisker Biscuit QS arrow rest, Mongo

  4. #4
    Senior Member TMax27's Avatar
    Join Date
    Sep 2008
    Location
    Fairland, OK
    Posts
    778

    Default

    Quote Originally Posted by Gus Archer View Post
    Thanks much, that sound great and awesome, ill be lookin into getting some new rev cams with the mods.
    That's what I'm talkin' about I hear (haven't actually shot a rev cam bow) that these rev cams are the cats meow.
    2008 Elite XXL 29 3/4" 70lbs- G1 Camo
    2008.5 Elite XLR 29 3/4" 60lbs- Ninja
    2009 Elite XLR 29 3/4" 65lbs- Metallic Red
    2009 Elite GT500 w/ Cuda Cams 25" 47lbs- Pink Ninja

  5. #5
    Junior Member Gus Archer's Avatar
    Join Date
    Dec 2009
    Location
    Tulsa
    Posts
    21

    Default

    Man thanks lot Tmax
    PSE Stinger, Aries sight with light, cobra releases, Goldtip Expedition Hunter 5575, Mongoose quiver, Whisker Biscuit QS arrow rest, Mongo

  6. #6
    Senior Member TMax27's Avatar
    Join Date
    Sep 2008
    Location
    Fairland, OK
    Posts
    778

    Default

    No problem Gus
    2008 Elite XXL 29 3/4" 70lbs- G1 Camo
    2008.5 Elite XLR 29 3/4" 60lbs- Ninja
    2009 Elite XLR 29 3/4" 65lbs- Metallic Red
    2009 Elite GT500 w/ Cuda Cams 25" 47lbs- Pink Ninja

  7. #7
    Senior Member gamoboy's Avatar
    Join Date
    Sep 2008
    Location
    tulsa oklahoma
    Posts
    748

    Default

    gus is talking about a pse stinger. is it possible on this bow. is it even worth the money and time?
    GT500 27.5/65= 284
    GT XT Hunter 7595
    Slick Trick 100gr Mags
    CBE Tek Hunter with Viper target and 3x lens
    Trophy Taker Pronghorn

  8. #8
    Senior Member TMax27's Avatar
    Join Date
    Sep 2008
    Location
    Fairland, OK
    Posts
    778

    Default

    Quote Originally Posted by gamoboy View Post
    gus is talking about a pse stinger. is it possible on this bow. is it even worth the money and time?
    I'm not sure if it would be possible on the Stinger, because I would imagine the Stinger cam is built just for a single cam application. Where, the rev cams, K8's, etc. were initially design as dual cams. Meaning, the Stinger cam doesn't have cam that is a mirror of itself. However, if it was possible I doubt it would be worth the time and money. Here's the deal: first you'd probably need to find someone who has done this before to get string lengths, and you'd need to aquire the top cam. Unless you make your own strings, you are looking at spending ~75$-90$ for a set of strings. If they are not the correct length the first time, you would have to buy em again. Just not worth it for a $300 bow. You would probably be at ~$200 for parts you don't even know is gonna work. This is one of those things where if you really don't know what you are doing, better off just leaveing it alone. Probably better off just saving that money, selling the Stinger, and picking up a used GTO, or XXL, or any ELITE for that matter. All of them a good bows.
    2008 Elite XXL 29 3/4" 70lbs- G1 Camo
    2008.5 Elite XLR 29 3/4" 60lbs- Ninja
    2009 Elite XLR 29 3/4" 65lbs- Metallic Red
    2009 Elite GT500 w/ Cuda Cams 25" 47lbs- Pink Ninja

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •