Thread: Perspective on Broadheads
03-14-2010, 10:22 PM #1
- Join Date
- Jul 2006
- South Louisiana
Perspective on Broadheads
lets start by throwing out the size or material of the ferrule of the broadhead and focus on the blades of the broadhead which do the cutting. i am gonna use a (2in. cut with 2 blades), (1.5in cut with 3 blades) and a (1.125in cut with 4 blades). the 1.125 in is the same as 1-1/8in cut. the size of the blades would always be 1/2 the diameter. here goes
2 inch 2 blade would be 1 inch for each blade = 2 inches of blade.
1.5 inch 3 blade would be .75 inches for each blade = 2.25 inches of blade
1.125 inch 4 blade would be .5625 inches for each blade = 2.25 inches of blade
don't be fooled by the diameter of the cut.
(x2) 2007 Guardians 70# @29in.
Gateway Razor feathers
Limb drivers, HHAs
meanv supressor, TruBall
03-14-2010, 10:32 PM #2
I try them on live game.
I often look at the hole and damage they do.
I consider how long the deer ran before going down.
Did the blades stay intact.
Lots of good heads on the market today. I still wont shoot nothing but fixed blade heads.
DBElite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
By kleve in forum Bowhunting forumReplies: 11Last Post: 09-29-2009, 02:19 AM
By bigbucks4all in forum Bowhunting forumReplies: 21Last Post: 09-02-2009, 12:23 AM
By iawalleyeguy in forum Bowhunting forumReplies: 17Last Post: 03-07-2009, 12:18 PM
By clemenlp in forum OfftopicReplies: 4Last Post: 10-02-2008, 02:58 AM
By slamdam in forum Bowhunting forumReplies: 4Last Post: 12-10-2006, 07:23 PM