You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 8 of 8

Hybrid View

  1. #1
    Senior Member
    Join Date
    Oct 2009
    Posts
    105

    Default Javi's information on hybrid cam tuning.

    Where can if find Javi's sticky on hybrid cam tuning? If anyone has a copy please pm it to me or just post it. Thanks.

    I am trying to tune up some Pearson hurricane cams and need some good input.

  2. #2
    Senior Member
    Join Date
    Oct 2009
    Posts
    105

    Default

    I just found it on archery talk, but it is good enough to post here also if anyone wants to.

  3. #3
    Senior Member JAVI's Avatar
    Join Date
    Sep 2008
    Posts
    1,636

    Default

    It was posted here at one time..
    Mike "Javi" Cooper

  4. #4
    Senior Member
    Join Date
    Oct 2009
    Posts
    105

    Default

    I am going to take a close look at the hurricane cams and see if I can use your information to help get them timed, sync'ed and fine tuned. I have to go and take a close look at the cams to see if I can recognize the cable stops and groves and such.

    Thanks.

  5. #5
    Senior Member JAVI's Avatar
    Join Date
    Sep 2008
    Posts
    1,636

    Default

    Quote Originally Posted by jim p View Post
    I am going to take a close look at the hurricane cams and see if I can use your information to help get them timed, sync'ed and fine tuned. I have to go and take a close look at the cams to see if I can recognize the cable stops and groves and such.

    Thanks.
    Jim the Hurricanes are only going to need to be put in rotational sync.. (start from the same place) they don't have a stop on the top cam..
    Mike "Javi" Cooper

  6. #6
    Senior Member
    Join Date
    Oct 2009
    Posts
    105

    Default

    Thanks. That will save me some time.

    So if I read your instructions right I will need to back the string off maybe 10 turns. bottom the limbs out set the sync based on the cam marking and then check the tiller to see if it is even.

    If I get the sync right and the tiller is off, should I just back off the limb bolts until I get the tiller to 0 and then call it finished or should I play the two back and forth.

    I want to shoot the bow with the limbs backed off about 2 turns so do you have any special instructions that might help me out?

  7. #7
    Senior Member JAVI's Avatar
    Join Date
    Sep 2008
    Posts
    1,636

    Default

    Quote Originally Posted by jim p View Post
    Thanks. That will save me some time.

    So if I read your instructions right I will need to back the string off maybe 10 turns. bottom the limbs out set the sync based on the cam marking and then check the tiller to see if it is even.

    If I get the sync right and the tiller is off, should I just back off the limb bolts until I get the tiller to 0 and then call it finished or should I play the two back and forth.

    I want to shoot the bow with the limbs backed off about 2 turns so do you have any special instructions that might help me out?
    Jim see my pm and give me a call.. it isn't nearly that complicated..
    Mike "Javi" Cooper

  8. #8
    Senior Member
    Join Date
    Oct 2009
    Posts
    105

    Default

    Read the PM. I will be in touch.

    Thanks

Similar Threads

  1. Pse mojo hybrid camo
    By jamesaf1981 in forum PSE Bows for Sale or Trade
    Replies: 4
    Last Post: 06-20-2009, 11:03 PM
  2. Any information
    By jenningssonic300 in forum General Archery Forum
    Replies: 0
    Last Post: 11-24-2008, 10:26 PM
  3. 07 Silver mojo Nrg Hybrid cams 60 pounds
    By bowhunterpse in forum PSE Bows for Sale or Trade
    Replies: 10
    Last Post: 10-29-2008, 09:16 AM
  4. Looking For Some Information
    By ilbowhunter in forum General Archery Forum
    Replies: 1
    Last Post: 08-27-2008, 11:03 PM
  5. PSE Mach Pro NRG Hybrid Target
    By okarcher1 in forum Bows for sale or trade
    Replies: 2
    Last Post: 11-22-2006, 04:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •