Thread: nock bushings?
01-09-2011, 04:40 PM #1
does any1 kno if ther is any advantage in shooting with the bushing an pin nocks over standard regular nocks? just wonderin.
01-09-2011, 04:42 PM #2
01-09-2011, 04:48 PM #3
ok thanks. i was just wondering because i have thought about switching because when i shoot 3d i mess up alot of arrows by hitting nocks and putting arrows into each other. maybe i'll switch and hopefully save some money on not having to replace arrows.
01-11-2011, 02:00 PM #4
- Join Date
- Jul 2007
- springstead wi
i have a few guys shooting pin nocks and they do save arrows . but all the guys that shoot by me that have shot them that are shooting over 320 fps have taken them off . they have more nocks that bust during the shot then the ones using regular type nocks .might be different in your area . but im shooting right at 340 fps and id rather loose a few arrows during a round then have to go to my backup bow because of a nock busting during the shot . but i hardly ever see ones bust on bows under 320 .
01-11-2011, 02:56 PM #5
I ve been shooting them for a couple of years now and have had real good luck with them so far.
But I don't shoot a bow anywhere near 320 FPS either.
I ve had a few of the bushings dinged up from other arrows hitting but haven't lost the arrow itself yet.
01-11-2011, 07:37 PM #6
im shooting at around 330 fps. but thanx i think ima give them a try.
01-11-2011, 11:03 PM #7
- Join Date
- May 2010
- Heath Springs SC
I'm shooting 320+ & had to change to the Bohning HD pin nocks I had one too many GT pin nocks bust on me. I also found that the transparent ocks will bust before the solid color. That's for both standard & pin nocks
08 GTO Thumper
09 Elite GT500 Ninja aka el fabricante de viuda
01-12-2011, 01:33 AM #8
imo the pin knocks are junk i had them on my victory x-ringers but since changed them to the acc g-knock with the uni bushing. the best knock out there. imotruball shooting staff
2012 pse dreamseason evo 6
member of the 160" 8ptr club
[/COLOR]Treelimb quivers best out there
treelimb quivers and sword sights pro staff
01-12-2011, 01:24 PM #9
- Join Date
- Jul 2004
- Middletown, Pa
Personally I prefer bushings and G nocks. I went through a period of pin nocks breaking during the arrow's flight. Often times found them in pieces on the floor right in front of the target. I know they were,'t breaking at the shot or they'd be closer to the shooting line, but rather than deal with the mental hassle I just use G nocks and be done with it. I can honestly say I've never had one of these malfunction and I'm talking about 15 years or so.Martin/Rytera Silver Star Shooter
UBP Life Member
PSAA Life Member
Worldwide Scuba Diver
01-12-2011, 02:19 PM #10
Pin nock bushings are the way to go.....at least for me. There is NO way I will shoot any thing but pins for ANYTHING other then indoors. Hunting sometimes but if I have the option with the arrow I am shooting for hunting I still go with pins. If your not using pins use a bushing of some sort....
But be fore warned that not all pin nocks are created equal and not all of them will withstand the high speeds that some shoot. Even at normal speeds nocks aren't created equal....I won't shoot an Eaton pin nock for these reasons. Those things are super fragile IMO....you fart close enough to someones quiver and one of those pin nocks will get cracks in it. The best pin nocks I have found are the ones I have been shooting for the past 2 years which are the beefier Bohning ones.
also making sure that you have the correct size center serving is VERY important when using pin nocks since there is much less material in the nock.
01-12-2011, 03:25 PM #11
Yesterday I ordered a dozen easton pin knocks from lancaster.
01-12-2011, 06:10 PM #12
- Join Date
- Jan 2008
- Wisconsin, USA
Just a little info
One of my 3D setups has been checked at a few events, the average speeds were 347 to 350 that being out of my Monster. My arrows used are equipped with pin nocks, the nocks used are the heavy duty Bohning pin nocks and with these I have never had any issues yes they are tough, but you still need to check them when getting smacked around by other arrows. Gold Tip has a new HD nock as well and I am looking forward to using these as well.
I will state that prior to the Bohning HDs I tried the Mc Kinney nocks which are better then the standard pin nocks but I did have a brand spanking new nock fail at the Vortex shoot 2 years ago causing a zero for score and the bow was fine allowing me to continue, this is when I switch to the Bohning HD.
Pin nocks are accurate and they do a great job for protecting the back of the arrows, but once in a while you still can have a arrow get damaged in the back, Check your nocks and arrows when playing hard, it can save scores and prevent accidents and injury.
I use and depend on them
Just my opinion
JDX--The only one that is your competitor is the air between your ears!
01-13-2011, 10:51 PM #13
thanx for the info evry1!
By Supermag in forum General Archery ForumReplies: 11Last Post: 05-12-2009, 11:08 AM
By okarcher in forum Arrows, Vanes, broadheads and arrow building componentsReplies: 3Last Post: 02-13-2009, 01:33 PM
By sean in forum Archery Equipment Accessories - Buy Sell TradeReplies: 2Last Post: 11-15-2007, 02:23 PM
By icom in forum WTB: Want to Buy Archery ItemsReplies: 1Last Post: 10-18-2007, 10:19 PM
By hoagie27 in forum General Archery ForumReplies: 3Last Post: 03-16-2006, 07:58 PM