You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 13 of 13

Hybrid View

  1. #1
    Wheely Threads Wheely's Avatar
    Join Date
    Jan 2007
    Location
    Oregon
    Posts
    5,601

    Default Gotta Loose Screw!

    I have a TRU Ball release that I love! But the little screw that adjusts the release comes loose everytime I shoot. Should I just super glue it in place? or is there a better alternative so I don't have to tighten it back up every 15-20 shots? I don't want to glue it so well that I can never adjust it again

  2. #2
    Senior Member
    Join Date
    Jan 2007
    Location
    South East Massachusetts
    Posts
    2,341

    Default

    A little fingernail polish will do it. Back out the screw and feed a little on the threads and tighten.
    FBSA Member

  3. #3
    Old and Experienced
    Join Date
    Dec 2007
    Location
    Dixon IL
    Posts
    74

    Default

    Quote Originally Posted by red44 View Post
    A little fingernail polish will do it. Back out the screw and feed a little on the threads and tighten.
    While you got that finger nail polish out (clear) it does a real good job of waterproofing your sight tape too. I always put a good coat of it on my sight tapes when I print them out.

  4. #4
    Senior Member Brown Hornet's Avatar
    Join Date
    Jan 2008
    Location
    Hornet's Nest
    Posts
    511

    Default

    The BEST solution is to call TRU Ball and send it back. They will either fix it or send you a new release.

  5. #5
    Senior Member
    Join Date
    Jan 2008
    Location
    Lawrence, KS
    Posts
    138

    Default

    I called them a few years ago on a similiar issue and was told to put a very small amount of BLUE loc tite on the screw and then wipe 90% of that off and re-insert the screw to the proper place and allow the loc tite to set up. I still have this release and have not had the issue since. I can also adjust that screw and it stays put.

    Marc
    Marc McCann
    Archery Rangemaster Tri County Rod and Gun Club and Kansas State ASA Federation Rep
    TriCounty or KsASA questions email me at TriCountyArchery@hotmail.com or ASAKansasFederation@hotmail.co m
    http://tricountyarchery.shutterfly.com/

  6. #6
    Wheely Threads Wheely's Avatar
    Join Date
    Jan 2007
    Location
    Oregon
    Posts
    5,601

    Default

    Thanks!

    I have tried the string wax, didn't help at all.

    I don't want to deal with sending it back if there is a simple fix.

    I will try the nail polish since I have some already, if that doesn't work, I will purchase some loctite ...thank you

  7. #7
    In God we trust wilkersonhunter's Avatar
    Join Date
    May 2010
    Location
    in gods country
    Posts
    1,246

    Default

    Quote Originally Posted by Brown Hornet View Post
    The BEST solution is to call TRU Ball and send it back. They will either fix it or send you a new release.
    will agree 100%. if you just bought it then send it back they will take good care of you.
    truball shooting staff
    2012 pse dreamseason evo 6
    member of the 160" 8ptr club
    [/COLOR]Treelimb quivers best out there
    treelimb quivers and sword sights pro staff

  8. #8
    Wheely Threads Wheely's Avatar
    Join Date
    Jan 2007
    Location
    Oregon
    Posts
    5,601

    Default

    Quote Originally Posted by wilkersonhunter View Post
    will agree 100%. if you just bought it then send it back they will take good care of you.
    actually I have had it for about 4-5 years

  9. #9
    Old and Experienced
    Join Date
    Dec 2007
    Location
    Dixon IL
    Posts
    74

    Default

    Well sometimes on small screws such as the ones in a release you can actually just use some string wax on the threads of the screw and it will hold it from comming loose. It seems to be just tacky enough to hold it without making it difficult to remove the screw.
    If that doesn't work you can try dripping a drop or two of wax from a burning candle down in the threads. If those two methods don't work then clean out the threads good( get the wax out) and try some of the blue loctite. DO NOT USE THE RED LOCKTITE.
    GOOD LUCK.
    Oh one more thing. If there is room you can sometimes run another screw down on top of the first one and that locks it in place.

Similar Threads

  1. Replies: 3
    Last Post: 09-03-2010, 06:52 PM
  2. sight screw tap
    By sweet old bill in forum General Archery Forum
    Replies: 3
    Last Post: 04-15-2010, 06:34 AM
  3. Help La Hunters so we don't loose Bow hunting days!
    By Basinboy in forum Bowhunting forum
    Replies: 0
    Last Post: 02-20-2010, 01:54 PM
  4. the JUICE is loose......
    By BUNNYMAN in forum Offtopic
    Replies: 10
    Last Post: 12-26-2008, 04:08 PM
  5. arrow rest bolt came loose......
    By southern_rebel in forum Beginners Archery Range
    Replies: 5
    Last Post: 07-18-2008, 12:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •