You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 9 of 9
  1. #1
    Senior Member asa1485's Avatar
    Join Date
    Jan 2009
    Posts
    520

    Default Carbon Matrix users that want a v-bar. Looky what I got by Doinker

    Just got this off the brown truck and been playing with it most of the morning. It is their Platinum vbar for the Matrix. It is a good bit larger then the normal one but had to be because of the tube that is on the side of the riser. It has 3 different holes so that it can be used on a right or left handed Matrix or even a standard riser. I have it in the left hole in the photo and you can see there is plenty of room between the vbar and riser. The middle hole will work as well but I personally like it this way better.

    I have the sidebars offset just a little in the photos just for the pics so you can see it better.

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

    Carbon Matrix users that want a v-bar. Looky what I got by Doinker - General Archery Forum

  2. #2
    Senior Member MeanV2's Avatar
    Join Date
    Jul 2007
    Location
    SE Illinois
    Posts
    1,162

    Default

    Sweet!

    Dan
    Maker of MEANV STRING SUPPRESSORS
    MAITLAND BOW DEALER
    Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
    www.meanvarchery.com

  3. #3
    trophy class deer hunter archeryassasin's Avatar
    Join Date
    Dec 2010
    Location
    baltic, ohio
    Posts
    127

    Default

    awesum looking bow!

  4. #4
    Junior Member jessgcmo's Avatar
    Join Date
    Jan 2011
    Location
    southwest, missouri
    Posts
    29

    Default

    do you know if its possible to get this setup with shorter vrods so I can use it in the hunter class.

  5. #5
    Senior Member asa1485's Avatar
    Join Date
    Jan 2009
    Posts
    520

    Default

    Quote Originally Posted by jessgcmo View Post
    do you know if its possible to get this setup with shorter vrods so I can use it in the hunter class.
    You can get the side bars in any length you want.

  6. #6
    Senior Member Brown Hornet's Avatar
    Join Date
    Jan 2008
    Location
    Hornet's Nest
    Posts
    511

    Default

    I just realized why you and others were saying that the Matrix causes an issue....I could use a regular mount because I swing my side rod out to the side A LOT more. I thought you guys were going crazy

  7. #7
    Senior Member asa1485's Avatar
    Join Date
    Jan 2009
    Posts
    520

    Default

    Yeah. It is that one freakin' tube you see on the side of the riser. I was using a regular offset as well and had it kicked out some and it was fine. But I like the feel of running the sidebar straight back which I was unable to do with the regular mount.

  8. #8
    Senior Member Brown Hornet's Avatar
    Join Date
    Jan 2008
    Location
    Hornet's Nest
    Posts
    511

    Default

    I think most people run theirs in closer to yours these days then out like mine. This weekend at LAS I looked at a ton of setups and other there were only a few people that run their bar out at the angle that I do.....Cousins, Reo and a few others. Most people can't handle or hold well with that much angle. But I have a bad wrist and when I pull it in tight my dot never stops moving and bouncing. I have tried sucking it in a trillion times and I always end up with it kicked out. I had a couple bows that like it kicked almost straight out to the side.

  9. #9
    Senior Member asa1485's Avatar
    Join Date
    Jan 2009
    Posts
    520

    Default

    Quote Originally Posted by Brown Hornet View Post
    I think most people run theirs in closer to yours these days then out like mine. This weekend at LAS I looked at a ton of setups and other there were only a few people that run their bar out at the angle that I do.....Cousins, Reo and a few others. Most people can't handle or hold well with that much angle. But I have a bad wrist and when I pull it in tight my dot never stops moving and bouncing. I have tried sucking it in a trillion times and I always end up with it kicked out. I had a couple bows that like it kicked almost straight out to the side.
    I have noticed a few as well. Like you mentioned Dave as well as a few others. Braden used to now he has his tucked in. I tried it but for me, unless I use the full vbar setup, I just do not like it. Having the other bar seemed to help mine settle down quicker then just one, at that angle.

Similar Threads

  1. Carbon Matrix??
    By jessgcmo in forum General Archery Forum
    Replies: 7
    Last Post: 01-30-2011, 02:40 PM
  2. Hoyt Carbon Matrix
    By Hermit Hill in forum General Archery Forum
    Replies: 7
    Last Post: 06-25-2010, 03:58 AM
  3. New carbon Matrix
    By matrix,hoyt in forum General Archery Forum
    Replies: 0
    Last Post: 06-13-2010, 01:02 PM
  4. Carbon Matrix on Pawn Stars
    By asa1485 in forum General Archery Forum
    Replies: 7
    Last Post: 04-13-2010, 02:51 PM
  5. Opinions on Doinker carbon elite/ carbon series
    By BuckeyeRed in forum General Archery Forum
    Replies: 11
    Last Post: 10-10-2007, 08:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •