You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Jan 2011
    Location
    Harwinton, CT
    Posts
    12

    Lightbulb Bow Torque, How much does your bow have?

    Hello All,
    Attached are two pdf files, Tilt Tamer Torque, How its Measured and Tilt Tamer Bow Torque Chart.
    First read “How it’s measured” and then read the results on the “Bow torque chart”
    Individual bows of the same model and year will measure differently due to manufacturing tolerances and assembly. All bows I have examined with cables that are offset generate cam tilt and therefore bow torque.

    You will note that this year there have been several companies addressing the issue of cam tilt and bow torque. This is a good thing for the archery community as we will all benefit from torque elimination. More accurate easier to shoot bows will be the result.
    You can achieve similar results with your existing bow by upgrading it with a Tilt Tamer. Even if you don’t purchase my tilt tamer, you have already benefited from the information I have just shared with you. “Accuracy Matters”
    Best Regards
    “oldbuck”
    Joe Marzullo
    Attached Files Attached Files

  2. #2
    EastOutfitters elkslayer4x5's Avatar
    Join Date
    Apr 2008
    Location
    Lane County, Oregon
    Posts
    289

    Default

    Quote Originally Posted by old buck View Post
    Hello All,
    All bows I have examined with cables that are offset generate cam tilt and therefore bow torque
    Well, that lets me out, all three Martin Nitrous camed bows listed below are shoot-thru systems. Zero Cam lean and or nock travel, other than straight forward. Very to tune. I hunt with the 63#er, all I have to remember is to load arrow from the front, killed that forkie up there with me in the avatar.
    Visit our web site
    http://eastoutfitter.tripod.com/index.html
    2 06 Martin Slayers, 63 & 55#s Nitrous C X QuikTune 3000s and HHA OL 5519s on both.
    04 Martin Cougar Elite Nitrous C X Quiktune 1000

  3. #3

    Default

    That's interesting information. I'd like to see a lot more bows tested and added to the list.
    Chris Christenson - Admin
    3DShoots.com - Find Archery Shoots near you
    ObsessionArchery.com - Archery Supplies

  4. #4
    Junior Member
    Join Date
    Jan 2011
    Location
    Harwinton, CT
    Posts
    12

    Default Bow Torque...How its measured...more details

    Hello,
    I have been recieving more questions about how I measure the bow torgue. So I made another drawing that I hope will clear that up.
    See the attached pdf.
    oldbuck
    Attached Files Attached Files

  5. #5
    Senior Member
    Join Date
    Mar 2009
    Posts
    236

    Default

    Quote Originally Posted by Chris View Post
    That's interesting information. I'd like to see a lot more bows tested and added to the list.
    I am curious how a 2011 Darton, 2011 Martins, the Athens Afflixtion, and the BT Specialist. All these bows have an adapted cable guard. Maybe this is a type of solution for the cam lean/ limb twist torque issue.

  6. #6
    Junior Member
    Join Date
    Jan 2011
    Location
    Harwinton, CT
    Posts
    12

    Lightbulb Cam Tilt Solutions

    Quote Originally Posted by alaz View Post
    I am curious how a 2011 Darton, 2011 Martins, the Athens Afflixtion, and the BT Specialist. All these bows have an adapted cable guard. Maybe this is a type of solution for the cam lean/ limb twist torque issue.
    Hello,
    I am happy to see that that bow mfg's are finally addressing the fact of cam tilt. I have been working on this for about 2.5 + years. I talked to many bow maunfactures about cam tilt, before this they mostly made believe it was none issue. I think all the solutions you mentioned will help to various degrees. My Tilt Tamer is a Patent Pending device to provide that solution without buying a new bow. I think the Tilt Tamer is a very cost effective way to get performance without the BIG bucks for a new bow.
    Thanks
    oldbuck

  7. #7
    Senior Member
    Join Date
    Mar 2009
    Posts
    236

    Default

    Quote Originally Posted by old buck View Post
    Hello,
    I am happy to see that that bow mfg's are finally addressing the fact of cam tilt. I have been working on this for about 2.5 + years. I talked to many bow maunfactures about cam tilt, before this they mostly made believe it was none issue. I think all the solutions you mentioned will help to various degrees. My Tilt Tamer is a Patent Pending device to provide that solution without buying a new bow. I think the Tilt Tamer is a very cost effective way to get performance without the BIG bucks for a new bow.
    Thanks
    oldbuck
    Absolutely, I think your design is a great retrofit for bows that do not have it. I am just curious how some fo the above would do in your test.

Similar Threads

  1. Accuracy Robbing Bow Torque
    By old buck in forum General Archery Forum
    Replies: 19
    Last Post: 01-26-2011, 05:20 PM
  2. release torque
    By dolecs in forum General Archery Forum
    Replies: 3
    Last Post: 01-05-2011, 02:48 PM
  3. f/s mathews torque less grip
    By steve bear in forum Archery Equipment Accessories - Buy Sell Trade
    Replies: 1
    Last Post: 07-08-2010, 10:46 AM
  4. torque vs no torque- heavy vs lite arrow
    By upnorth in forum General Archery Forum
    Replies: 0
    Last Post: 05-10-2009, 02:50 PM
  5. Best way to not torque the bow.Detect bow grip torque.
    By tresmon in forum General Archery Forum
    Replies: 2
    Last Post: 08-11-2007, 10:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •