You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jan 2007
    Posts
    1

    Default Need Help with arrows

    Recently santa dropped off some Easton Cobalt X7 arrow shafts. My question is what type of vanes do I put on these? Curently I am using 2212Easton xx78 super slam selects with the pre installed 4" vanes. I seem to get good grouping with this setup; however, I see all the different vanes out there and wonder if I could install something better. My primary shooting is 3D and almost never shoot past 40 yards. My equipment is as follows: Mathews LX 60lbs draw with 27.5" draw lenght, Quicktune 3000 micro and an Extreme sniper sight. Thanks, gjmen

  2. #2
    I pray for you! BUNNYMAN's Avatar
    Join Date
    Apr 2005
    Location
    the Hutch
    Posts
    29,891

    Default

    loose the alluminums and get some carbons?????

    just kidding that sounds like a good set up to me.....

    for a standard vane it is hard to beat AAE.....
    I cut things up and split them down!

  3. #3
    Bisquit....... BowhuntnHoosier's Avatar
    Join Date
    Jan 2006
    Location
    Hoosierville
    Posts
    13,882

    Default

    to the forum gjmen.

    I'm not sure about which vanes would be the best for those arrows but I have Blazers on all my arrows at this time. Good luck


    "HONDA"

  4. #4
    Member
    Join Date
    Apr 2005
    Location
    NE Indiana
    Posts
    43

    Default

    try the low profile duravanes 4" (legal ibo hunter class)

    I personally shoot 2" blazers(IBO Open class), and LPDVs 4" for IBO hunter.


    My 3 cents worth,Good luck,

    Matt
    05 SwitchBack
    Sureloc Supreme
    Bullseye APM 2X

    "The LORDS will is my work"

  5. #5
    get'n rid of target panic STRO's Avatar
    Join Date
    Mar 2006
    Location
    N. Illinois
    Posts
    1,525

    Default

    I have the spinvanes from nap on my 3d and hunting arrows, very happy with them. Also heard the blazer vanes are good.
    .

    Carbon Matrix

    Certified NASP Instructor

  6. #6
    Senior Member
    Join Date
    Jul 2004
    Location
    Middletown, Pa
    Posts
    813

    Default

    As Viper said, you have to determine what class you'll be shooting if you shoot sanctioned IBO events. If it's ASA or just mostly local shoots then it's not as important an issue. In either case though I have foind the Duravane 4" Low Profile to be very consistant for weight. They weigh right at 6.5 grain each. I even use them for hunting now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •