You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 41 to 60 of 110
  1. #41
    Junior Member
    Join Date
    Dec 2011
    Posts
    15

    Default limbs

    i'll take either blk or camo. the limbs that i currently have are 70#. the only numbers that i see on the limbs are there is 68 on one and 67 on the other. they measure just a little under 15" in over all length. i could use a pair of 60# limbs and 1 70# limb if you got them.

  2. #42
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Limbs

    It looks like I do have those. They are camo and the # on the limbs are 58. I also have a set with the # 68 on them. That should have you covered on a set of sixty and seventy lb limbs. They are like new, not scratched, faded or anything...... I would rather not sell just one limb ( I hate to seperate the pair) but I will take $40.00 a set TYD. $80.00 TYD for both sets. Let me know what you want to do? Merry Christmas!!

  3. #43
    Junior Member
    Join Date
    Dec 2011
    Posts
    15

    Thumbs up limbs

    i got the limbs today and they look great. thanks

  4. #44
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default

    Great, I am glad that you like them. Let me know if I can help with anything else.....

  5. #45
    Junior Member
    Join Date
    Jan 2007
    Location
    Arizona
    Posts
    108

    Default

    Did you have any 30-40# limbs for a 2010 Z7?

  6. #46
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default limbs

    I do not have any limbs like that, sorry.....

  7. #47
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Cams and limbs

    I have run across another box of Mathews cams and limbs. I listed them in another add. If you don't see what you need here, check out the other add. Thanks

  8. #48
    Junior Member
    Join Date
    Jan 2012
    Location
    Indiana
    Posts
    7

    Default Z ccr

    PM sent ......Z-CCR

  9. #49
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Got it........

    I got your PM and sent you a reply. I have the cam as well..... Thanks

  10. #50
    Junior Member
    Join Date
    Jan 2012
    Location
    Indiana
    Posts
    7

    Default Z-ccr

    $ via PP sent!!

  11. #51
    Junior Member
    Join Date
    Jan 2012
    Location
    Gordon Co. GA
    Posts
    4

    Default

    I am looking for a Z EER HL cam for my Ultra Max, I am also looking for a set of 50-60# Lims.
    If you have them please give me a price.

  12. #52
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Z ccr

    Hey Kevin, I got your PP payment. I will get the cam out today. Thanks

  13. #53
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Z eer hl

    Hey Little Indian, I don't see a Z EER HL. I do have a Z2 EER, it is the newer version of the EER, but it is not High Letoff (HL). I should have some limbs, can you give me the number on the limb or maybe even the length. If you don't know the number, we can probily look it up. Also, you looking for camo or black limbs.....LMK

  14. #54
    Junior Member
    Join Date
    Jan 2012
    Location
    Gordon Co. GA
    Posts
    4

    Default

    the limbs measure right at 15", I don't see numbers on them, I am in greater need of the cam (z eer hl) which would bring the draw length on my bow closer to where I need to be.
    I am not sure if the z2 ee cam you have would fit my Ultra Max which was manufactured 1998-2001
    and if it does, is it a 60 or 80% let off.

  15. #55
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Limbs and cam

    I have a set of 60lb. camo limbs. I will take $40.00 for the limbs TYD. The Z2 EER will work, it is the newer version of the Z EER. It is 65% let off not 80%. The HL on the cam stands for High Letoff (HL) which is your 80%. I will take $35.00 for the one I have. Paypal is moto-116@att.net. Let me know if I can help. Thanks.....
    Last edited by oldandone; 02-02-2012 at 03:39 PM. Reason: wording was wrong

  16. #56
    Junior Member
    Join Date
    Jan 2012
    Location
    Gordon Co. GA
    Posts
    4

    Default

    I am tempted to purchase both the cam and the limbs, do you know if the LB on the limbs can be adjusted down to 50 Lb, or better yet do you have a 50 Lb set of limbs?

  17. #57
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default limbs and cam

    I do not have any 50lb limbs. The 60 is supposed to be the max for that limb. Most of the limbs can be backed off around ten pounds which will put you @ 50. No two bows are exactley the same, but you should be close as long as your string and cables are standard. Thanks

  18. #58
    Senior Member ace7038's Avatar
    Join Date
    Jan 2008
    Location
    Skunks Misery Ontario
    Posts
    176

    Default

    Do you have any 50# to 60# limbs for a switchback?
    Mathews Switchback 63# 29"
    Victory Arrows and FOBs!

  19. #59
    Member
    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    78

    Default Do you have any 50# to 60# limbs for a switchback?

    Humm, I dont think that I have those. Let me look to be sure. I will update as soon as I know. Thanks

  20. #60
    Junior Member
    Join Date
    Jan 2012
    Location
    Gordon Co. GA
    Posts
    4

    Default

    Quote Originally Posted by oldandone View Post
    I do not have any 50lb limbs. The 60 is supposed to be the max for that limb. Most of the limbs can be backed off around ten pounds which will put you @ 50. No two bows are exactley the same, but you should be close as long as your string and cables are standard. Thanks
    Are the 60 lb limbs and the 60% cam in good shape?
    Last edited by Little Indian; 02-05-2012 at 07:20 AM. Reason: wording wrong

Similar Threads

  1. Mods - Cams - Limbs
    By IAFFmedik in forum Cams, Mods and Strings
    Replies: 7
    Last Post: 10-13-2013, 07:49 PM
  2. Martin S4 w/Nitrous cams 27-30" 45-60# Elite Limbs
    By 60insideout in forum Bows for sale or trade
    Replies: 0
    Last Post: 02-10-2010, 10:57 PM
  3. 2005 Blue Fusion HOYT ProTec W spiral X Cams / XT3000 Limbs
    By vegaskevin in forum Hoyt Bows for Sale or Trade
    Replies: 4
    Last Post: 06-11-2009, 04:52 PM
  4. Martin Cams... 26.5 to 27" DL on Elite limbs
    By SandSquid in forum WTB: Want to Buy Archery Items
    Replies: 2
    Last Post: 12-13-2008, 04:48 AM
  5. wtb hoyt command cams and limbs
    By vtprairie in forum Hoyt Bows for Sale or Trade
    Replies: 1
    Last Post: 05-31-2008, 02:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •