You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 4 of 4

Thread: Aerovane II

  1. #1
    Junior Member
    Join Date
    Apr 2013
    Posts
    2

    Default Aerovane II

    Hello all, I'm new to the forum and was looking for a little help and advice. Has anyone used these vanes, Aerovane II? Also I was looking to start doing my own fletching and try different things. Can the Aerovanes be fletched with something else other than what Firenock offers (to much $$$$ for theirs). All thoughts are appreciated.

  2. #2
    Junior Member
    Join Date
    Apr 2013
    Posts
    2

    Default Aerovane

    Hi again, after putting the post up last night I looked at many other here and believe there are other jigs that will work with these vanes, That said I was hoping to get some feedback from other hunters on their thoughts and how these perform. Thank you.

  3. #3
    Senior Member duanelane's Avatar
    Join Date
    Jan 2012
    Location
    BF IOWA
    Posts
    1,534

    Default

    I personaly havent used the areovane , my hunting partner does and has good luck with them. He uses a arizona quick fletch with good results.

  4. #4
    Senior Member
    Join Date
    Apr 2008
    Location
    Wisconsin
    Posts
    237

    Default

    I've placed them on shafts using a Bitz. Had to use dbl back tape to hold a 1/16" square piece to the clamp to give the clamp enough clearance for a feature on the vane. Not sure if things have changed since then because I've only tried them once... can't resist trying new stuff.

    IMO, if you take the time to tune your equipment, there are many economical vane choices that will do the same job.

Similar Threads

  1. Aerovane III
    By Firenock in forum Manufacturer Announcements and Press Releases
    Replies: 2
    Last Post: 01-07-2013, 12:49 AM
  2. Aerovane Fletching Jig
    By Allen in forum General Archery Forum
    Replies: 23
    Last Post: 05-30-2011, 11:51 AM
  3. Firenock aerovane jig
    By Firenock in forum Manufacturer Announcements and Press Releases
    Replies: 0
    Last Post: 02-24-2011, 07:33 AM
  4. Firenock Aerovane FAQs
    By Firenock in forum Manufacturer Announcements and Press Releases
    Replies: 0
    Last Post: 03-27-2009, 02:21 PM
  5. Anatomy of Aerovane II
    By Firenock in forum Manufacturer Announcements and Press Releases
    Replies: 3
    Last Post: 01-27-2009, 09:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •