08-07-2013, 06:53 PM #1
Ever have a bow lock up at full draw?
Just had an Elite gt500 lock up at full draw!!
Put a new set of strings on a gt500 and drew it back to check the dw. Well when I let up it went limp. Yikes. Both cams lock up and didn't move. The cams were to far advanced or over rotated. Usually happens to longer draw lengths or draw stops poorly adjusted.
08-07-2013, 08:12 PM #2
Glad to see im not the only one to ever do that. Put speed mods on my elite answer pulled back and stuck, tinkled a little down my leg......... Built a draw board the next day.
08-07-2013, 08:28 PM #3
08-27-2013, 07:50 AM #4
i have only seen one of these. but they had a bow aound here that had like a 99% let off and a few guys who bought one said they had problems with the bow locking up not sure why though?
as a demo they would draw the bow back and point the riser to the ground then just hold the string.the weight of the riser would hold the bow at full draw.craziest thing i have ever seen.
Red. PSE Supra ME
Black. PSE Supra ME
08-27-2013, 09:23 AM #5
haven't had bow lock up, but I have a few times.Lingerie football. I dont care who wins.
sent using my keyboard and two fingers
09-02-2013, 07:04 PM #6
- Join Date
- Jul 2007
- springstead wi
only when the first bowtechs cam out draw specific cams . still cant figure how I was able to get the bow back in the press without it going off .
09-03-2013, 05:23 PM #7
By Bowhunter Bob in forum Tournament DiscussionsReplies: 1Last Post: 02-05-2011, 04:09 PM
By Devine Shot in forum General Archery ForumReplies: 11Last Post: 07-27-2010, 07:56 PM
By J.Blay in forum Misc Hunting EquipmentReplies: 0Last Post: 07-03-2009, 05:59 PM
By aim small in forum General Archery ForumReplies: 4Last Post: 07-28-2008, 01:42 PM
By IN Bowhunter in forum Bowhunting forumReplies: 1Last Post: 01-27-2008, 02:53 PM