Thread: Newest project
02-21-2014, 11:40 AM #1
New clearing job coming up in the spring. As soon as the snow melts. Low impact is going to be key. So I am building a log trailer to tow behind the ATV. Had a bunch of galvanized tubing laying around. Going to build it with walking beam axles. So far the parts list and costs are as follows...
Set of ATV tires on rims-sort of free.(had to watch the guys house while he was away)
Galvanized tubing. Free (got it in a pile of scrap)
Axles and Hubs. $300 (includes shipping)
Various drill bits and things (+/- $50)
Its a work in progress, will update thread as the stages progress if anyone shows intrest.
Still have a few things to aquire to complete it but its coming along alot faster than i thought it would.
There will be alot of welding going on soon.I cut things up and split them down!
02-21-2014, 03:45 PM #2
Way Cool bunny,you could put the odd deer carcase on that trailer Bro!!!!I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake.
02-21-2014, 05:53 PM #3
looking goodLingerie football. I dont care who wins.
sent using my keyboard and two fingers
02-21-2014, 06:30 PM #4
How about that shop I have to work in. Pretty awesome huh?I cut things up and split them down!
02-21-2014, 09:30 PM #5
looks good buddy, but don't weld galvanized without a lot of ventilation. smokey no goody for you.
02-21-2014, 09:52 PM #6
No worries JC. That big garage door opens. And we grind of the coating off.I cut things up and split them down!
02-22-2014, 07:28 PM #7
Who knew drilling straight holes with cordless drill would be so hard.
But the frame is coming together nicely. Hopefully get some of it welded tomorrow. Red wants to go to the Tack Shop and Tractor Supply. So maybe I will pick up the 2 inch coupler while I am there.I cut things up and split them down!
02-24-2014, 09:43 AM #8
Screw this drilling by hand crap. Taking the drill press home...should make life easier.I cut things up and split them down!
02-25-2014, 08:50 AM #9
Where did you find the axles and hubs? I been thinking of making something a long the same lines, I got a bunch of dead ash back in a swampy area that I want to remove. It's to far to carry and I'm afraid of taking my tractor that deep in the woods.Everyone has a plan till they get punched in the mouth.
02-25-2014, 09:24 AM #10
Do you have an ATV? In not, check out the logrite log arches. We sell them. You can get the small one for less than $600.
Axles and hubs:
I ordered both on Amazon.
The hubs ship from "Southwest Wheel"
The axles ship from Northern Tool.
I just placed a second order for a couple more.
Going to eventually build an arch for the real big stuff.I cut things up and split them down!
02-25-2014, 06:25 PM #11
02-26-2014, 12:47 PM #12
I need welding practice.I cut things up and split them down!
02-26-2014, 01:13 PM #13
I like that ATV arch but is out of my price range. If I find the right hub and tires I was planning on building something that would picking up the front part of the log and let the back drag the ground, I never thought of picking the whole log.Everyone has a plan till they get punched in the mouth.
02-26-2014, 01:45 PM #14I cut things up and split them down!
02-28-2014, 09:31 AM #15
Frame and carrier done. Working on attaching axles next. Would like to make it a sliding axle I think. May or may not work.I cut things up and split them down!
02-28-2014, 09:33 AM #16I cut things up and split them down!
03-05-2014, 08:19 AM #17
After stalling (not by choice) for a few days. Finally got to get back in the shop. Should be able to assemble it tonight and see if all of calculations were correct.I cut things up and split them down!
03-05-2014, 09:30 PM #18
Got back in the shop tonight after checking on a sick cow. Got the mock up completed. Need to drill a few more holes and add a weld here or there but for the most part its completed. Gonna add paint (Stihl-orange and white).I cut things up and split them down!
03-05-2014, 11:49 PM #19
03-06-2014, 05:53 AM #20
Thanks J.C. cows are good. Little cold. But otherwise fine. How u is?I cut things up and split them down!
By HCH in forum Bowhunting forumReplies: 2Last Post: 07-16-2010, 11:15 AM
By 72Beetle in forum General Archery ForumReplies: 1Last Post: 12-23-2009, 09:44 PM
By TMax27 in forum Bowhunting forumReplies: 0Last Post: 10-13-2008, 05:01 PM
By JWill226 in forum Beginners Archery RangeReplies: 12Last Post: 08-13-2008, 11:08 PM
By BUNNYMAN in forum General Archery ForumReplies: 20Last Post: 04-14-2007, 07:17 PM