You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Results 1 to 2 of 2

Thread: Arrow insert?

Hybrid View

  1. #1
    Junior Member
    Join Date
    Sep 2005
    Location
    Central Illinois
    Posts
    7

    Default Arrow insert?

    Noob with a quick Q. I just got a new sew of Carbon Express Terminators cut at the local shop. I've noticed a difference between these and all the others I've had. The lip on the end of threaded insert for the points, on all my others, have fit flush with the arrow. My latest half dozen have a small lip on the lip(if this makes any sense) that sticks out just a little wider than the arrow. Almost as if the inserts were for a larger diameter arow. I'm not really noticing any difference in their flight. But I'm thinking that if the'll be a problem it will be when it counts. Should I be concerned?

  2. #2
    Member
    Join Date
    Sep 2005
    Location
    Northern OK.
    Posts
    31

    Default

    Carbon Express makes inserts specific for certain shafts. Often it is hard to tell which goes to which, but if you read the packaging it tells you which shaft that insert is designed for. The inserst for the Terminators, 3D Selects, and CX is what I am familiar with. The inserts for those are determined by shaft size (200, 300, 400, 4560, 6075, etc). They are very close to being the same and if care is not taken it is easy to get them mis-matched. I know I have done it in the past. Had the same little lip hanging out beyond the shaft. Never had a problem with accuracy or arrow damage, and I shot them for about a month until I noticed. Maybe it made them harder to pull out of my targets, but I really can't remember. I did re-do my shafts though, not because of performance, but just because I like things done correctly. You may want to take them back to the pro shop and see what they will do.

Similar Threads

  1. insert glue
    By Slippy in forum General Archery Forum
    Replies: 50
    Last Post: 02-02-2008, 06:51 PM
  2. how do you get an insert out of an arrow
    By bowcraze30 in forum General Archery Forum
    Replies: 16
    Last Post: 11-11-2007, 09:18 PM
  3. Arrow insert weight?
    By Dredly in forum General Archery Forum
    Replies: 19
    Last Post: 07-02-2007, 09:41 PM
  4. How do I get out an insert?
    By Dredly in forum General Archery Forum
    Replies: 18
    Last Post: 04-30-2007, 10:41 PM
  5. another insert!!
    By diamond-vic. in forum General Archery Forum
    Replies: 11
    Last Post: 01-03-2007, 12:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •