You are Unregistered, please register to be able to read posts in all forums and participate in the discussion.
Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1
    Senior Member SilentSniper's Avatar
    Join Date
    Jul 2007
    Location
    Newburgh, IN
    Posts
    146

    Default BowTech Guardian problems

    Well my wife and I just had a little girl 3 months ago and the going to the range thing as slowly come to a halt. Not a bad thing. Well I pulled out the old Guardian and the other day and pulled her back. At the very end of the draw cycle right after the cams roll over there is a very loud click. Not a small click.....a big click. Well I took it in today to the archery shop to have them look at it. They told me that they have had a few customers complain about the same thing. Non of those customers have had the problem fixed from what I gathered. Well after a few minutes and a few tries of the proshop fixing the problem I called Bowtech myself. I spoke with a Jeff about the problem. He said that it was a problem and he was going to send me a new module that had a deeper valley. Has anyone else had this problem? Bow shoots great, but I can be clickin in the woods?
    BowTech Guardian 66lbs @ 26 inches
    Trophy Ridge DropeZone
    Gold Tip Arrows
    FOB Fletchings

  2. #2
    Senior Member thehairlessone!'s Avatar
    Join Date
    Jun 2007
    Location
    kansas
    Posts
    1,003

    Default

    SS,
    did you pm bowtech_shooter on AT?

    rick
    No catchy signature here.....

  3. #3
    Senior Member MeanV2's Avatar
    Join Date
    Jul 2007
    Location
    SE Illinois
    Posts
    1,162

    Default

    If he sends you the new mods your problem will be over. It was just the early mods and on certain drawlengths where that would happen. Sounds like your problem will soon be fixed

    Dan
    Maker of MEANV STRING SUPPRESSORS
    MAITLAND BOW DEALER
    Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
    www.meanvarchery.com

  4. #4
    Senior Member VE6WTF's Avatar
    Join Date
    Jul 2007
    Location
    Devon, Alberta
    Posts
    211

    Default

    what is AT?

  5. #5
    Slippy for President! Doc Holliday's Avatar
    Join Date
    Jul 2007
    Location
    Tn.
    Posts
    355
    Never buy reloads from a man named Stumpy, Lefty or Nub

    http://www.thefiringline.com/HCI/molon_labe.htm

  6. #6
    Senior Member
    Join Date
    Apr 2007
    Posts
    975

    Default

    Quote Originally Posted by VE6WTF View Post
    what is AT?
    Evil Incarnate.

  7. #7
    Banned
    Join Date
    Jul 2007
    Location
    Missouri
    Posts
    1,001

    Default

    you got that right
    Quote Originally Posted by Sniper View Post
    Evil Incarnate.

  8. #8
    Senior Member Cameron's Avatar
    Join Date
    Jul 2007
    Location
    SE Michigan
    Posts
    803

    Default

    Quote Originally Posted by MeanV2 View Post
    If he sends you the new mods your problem will be over. It was just the early mods and on certain drawlengths where that would happen. Sounds like your problem will soon be fixed

    Dan

    Can you expand on this? I had this happen, but only once or twice, and I just though it was because I had not shot the bow in a while.
    www.livingstongunclub.org
    www.jimposten.com for the finest stabilizers in the world
    www.meanvarchery.com Custom String Suppression for that shot of a lifetime
    Add some custom bling with a www.slingbraid.com

  9. #9
    Senior Member SilentSniper's Avatar
    Join Date
    Jul 2007
    Location
    Newburgh, IN
    Posts
    146

    Default

    Quote Originally Posted by VE6WTF View Post
    what is AT?

    www.archerytalk.com
    BowTech Guardian 66lbs @ 26 inches
    Trophy Ridge DropeZone
    Gold Tip Arrows
    FOB Fletchings

  10. #10
    Prodigal Son jcmorgan31's Avatar
    Join Date
    Mar 2006
    Location
    Orange Co., Indiana
    Posts
    4,569

    Default

    Quote Originally Posted by Doc Holliday View Post

    Too funny....
    Pathfinder Arrow Wraps

  11. #11
    Senior Member MeanV2's Avatar
    Join Date
    Jul 2007
    Location
    SE Illinois
    Posts
    1,162

    Default

    Quote Originally Posted by Cameron View Post
    Can you expand on this? I had this happen, but only once or twice, and I just though it was because I had not shot the bow in a while.
    Cameron, I think it was with the very 1st mods out and on 29" and longer draws. I could be wrong on the draw length range

    Dan
    Maker of MEANV STRING SUPPRESSORS
    MAITLAND BOW DEALER
    Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
    www.meanvarchery.com

  12. #12
    Senior Member Cameron's Avatar
    Join Date
    Jul 2007
    Location
    SE Michigan
    Posts
    803

    Default

    Well, I have not shot the BT in a few weeks, so we will see if there is an issue on Sunday.

    I have to shoot it anyway, the Conquest feels naked without the CSS.
    www.livingstongunclub.org
    www.jimposten.com for the finest stabilizers in the world
    www.meanvarchery.com Custom String Suppression for that shot of a lifetime
    Add some custom bling with a www.slingbraid.com

  13. #13
    Junior Member showtime hoyt's Avatar
    Join Date
    Jul 2007
    Location
    northern colorado
    Posts
    16

    Default what causes it?

    a loud click? how can you tell what mods you have? i been thinking about getting a gardian,it super quite.a guy at the range had one and it shounded just like a rubberband shooting off your finger,about that loud.i think bow-tech is on to something.

  14. #14
    Senior Member SilentSniper's Avatar
    Join Date
    Jul 2007
    Location
    Newburgh, IN
    Posts
    146

    Default

    Bowtech sent me new modules and the problem is taken care of. She is nice a quit now.
    BowTech Guardian 66lbs @ 26 inches
    Trophy Ridge DropeZone
    Gold Tip Arrows
    FOB Fletchings

  15. #15
    Senior Member MeanV2's Avatar
    Join Date
    Jul 2007
    Location
    SE Illinois
    Posts
    1,162

    Default

    Quote Originally Posted by showtime hoyt View Post
    a loud click? how can you tell what mods you have? i been thinking about getting a gardian,it super quite.a guy at the range had one and it shounded just like a rubberband shooting off your finger,about that loud.i think bow-tech is on to something.
    The click noise will occur as you are drawing the bow. If it doesn't you are good to go

    Dan
    Maker of MEANV STRING SUPPRESSORS
    MAITLAND BOW DEALER
    Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
    www.meanvarchery.com

  16. #16
    Senior Member Cameron's Avatar
    Join Date
    Jul 2007
    Location
    SE Michigan
    Posts
    803

    Default

    No noise from my Guardian. Quiet as the day it was born.
    www.livingstongunclub.org
    www.jimposten.com for the finest stabilizers in the world
    www.meanvarchery.com Custom String Suppression for that shot of a lifetime
    Add some custom bling with a www.slingbraid.com

  17. #17
    Senior Member thehairlessone!'s Avatar
    Join Date
    Jun 2007
    Location
    kansas
    Posts
    1,003

    Default

    Quote Originally Posted by Cameron View Post
    No noise from my Guardian. Quiet as the day it was born.
    same here. I love that bow more and more every time i shoot it.

    rick
    No catchy signature here.....

  18. #18
    One eyed/Gutless wonder QSA's Avatar
    Join Date
    May 2007
    Location
    Buford Ga.
    Posts
    5,998

    Default

    Quote Originally Posted by VE6WTF View Post
    what is AT?
    AT = Alligator tail?
    Quick Stand Archery Patent Pending
    Home of the Quick Stand Compound Bow Stand
    An proud member of the FBSA
    message of the week . . . . Well I will never be all right, Because I am half left. lol

  19. #19
    Senior Member dzingale's Avatar
    Join Date
    May 2005
    Location
    new york
    Posts
    338

    Default

    Why is this old post being brought up after all this time?
    08 Constitution 50# 29"
    08 Allegiance 70#
    07 Guardian 77#
    http://www.3dshoots.com/forums/index.php?referrerid=478
    FBSA Member

  20. #20
    I pray for you! BUNNYMAN's Avatar
    Join Date
    Apr 2005
    Location
    the Hutch
    Posts
    29,901

    Default

    Quote Originally Posted by dzingale View Post
    Why is this old post being brought up after all this time?
    brand hater????
    I cut things up and split them down!

Similar Threads

  1. want to buy bowtech guardian
    By bowhunter1988 in forum WTB: Want to Buy Archery Items
    Replies: 0
    Last Post: 01-09-2008, 01:59 AM
  2. bowtech guardian
    By carstud in forum General Archery Forum
    Replies: 7
    Last Post: 08-11-2007, 09:44 PM
  3. BowTech Guardian
    By crazyjz in forum Bowtech Bows for Sale or Trade
    Replies: 4
    Last Post: 06-06-2007, 04:51 PM
  4. New BowTech Guardian.
    By Straightandtrue67 in forum General Archery Forum
    Replies: 3
    Last Post: 05-15-2007, 11:46 PM
  5. bowtech guardian
    By cory521 in forum General Archery Forum
    Replies: 5
    Last Post: 03-04-2007, 11:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •