Mathews Cams/Limbs

[oldandone]

All cams are for RH bows. Some are like new, some are used. Let me know what you are looking for. Make me a price for all or let me know what you need and we will work it out. I also have a bunch of limbs that need to go. Thanks

CSL-CR
CSL-DR

MAX CAMS:
SS-DR
Z2-EER
Z-EER-HL
Z2-DDR
Z-DDR
Z-BBR
Z-CCR
MXHL-2

MINIMAX:

(6) Minimax-EER
Minimax-DDR

MQ1-29R
MQ1-28.5R

SL2-CR
SL2-C.5R
SLC.5R

[Rotorhead]

I'm interested in 3 of the cams listed. Specifically;

SS-DR
Z-DDR
SL2CR

Please let me know which are new, which are used and their condition, and how much yo want for each.
Thanks!

[red44]

Casually interested in limbs for a Rival Pro, 60# or less. They also fit an MQ1 and MQ32. Also if you have any C2 limbs of 60# or less. I have spares, but if the price is right...
you can PM me if desired.

[oldandone]

The SS DR is in as new condition. It has been on a bow, but it shows no wear. $20.00 TYD. The SL2CR is in the same condition. $30.00 TYD. The Z-DDR has been used, but it is in great condition. These are all great cams. $20.00. TYD. Let me know. Thanks

[oldandone]

I probaly have limbs for the Rival, MQ1 etc. Not sure about the others. I will look.

[Rotorhead]

I'll take all 3 at the prices you listed. $70.00 for all. How do you like payment? You can PM me if you like.

Thanks.

[oldandone]

I sent you a PM

[Themightytree]

What is your price on the Z-BBR and do you have the idler wheel to go with it? Thanx.

[oldandone]

I will take $35.00 TYD for the cam, I do NOT have a large idler wheel. The only idler wheels that I have left are for the mini-max cams. Let me know if you want it. Thanks

[Themightytree]

Did you get my PM.

[oldandone]

I did get your PM and I sent the mailing info to you. Let me know which way you are paying and I will keep a watch for it. I will need your mailing addrress. Thanks

[Themightytree]

Did you get a notice of my PayPal payment and my mailing address?

[tatt2todd]

I need a Q2 Straight line max cam.... I am using a 29 inch draw cam, but My draw is measured at 27.2 inches. I would like a 27. 5 inch cam, or a 27 inch cam.... Can you help with this

[oldandone]

Sorry, 28 is the shortest draw that I have.

[Jdingle86]

I'm looking for Cam for my Mathews Z Max it 's a Z CCR-HL Do you have it ? and what would you take for it?

[tomsamp]

I have Feathermax
Need the z-eer-hl 80% let off
Is it still available?

[oldandone]

I DO NOT have a z CCR HL. I DO HAVE a CCR but not the HL. Cam is in great condition, take $35.00 TYD for it if interested. Thanks

I DO HAVE a Z EER HL, cam is in great condition, take $35.00 TYD for it if interested. Thanks

[bzm]

do you have any 60# limbs that would fit on an ultra max? they're 15" long.

[oldandone]

There is a good chance that I do. Let me look and get back to you. Do you know the numbers on the limbs, are you looking for black or camo?

[bzm]

i'll take either blk or camo. the limbs that i currently have are 70#. the only numbers that i see on the limbs are there is 68 on one and 67 on the other. they measure just a little under 15" in over all length. i could use a pair of 60# limbs and 1 70# limb if you got them.

[Little Indian]

I am looking for a Z EER HL cam for my Ultra Max, I am also looking for a set of 50-60# Lims.
If you have them please give me a price.

[oldandone]

Hey Kevin, I got your PP payment. I will get the cam out today. Thanks

[oldandone]

Hey Little Indian, I don't see a Z EER HL. I do have a Z2 EER, it is the newer version of the EER, but it is not High Letoff (HL). I should have some limbs, can you give me the number on the limb or maybe even the length. If you don't know the number, we can probily look it up. Also, you looking for camo or black limbs.....LMK

[Little Indian]

the limbs measure right at 15", I don't see numbers on them, I am in greater need of the cam (z eer hl) which would bring the draw length on my bow closer to where I need to be.
I am not sure if the z2 ee cam you have would fit my Ultra Max which was manufactured 1998-2001
and if it does, is it a 60 or 80% let off.

[oldandone]

I have a set of 60lb. camo limbs. I will take $40.00 for the limbs TYD. The Z2 EER will work, it is the newer version of the Z EER. It is 65% let off not 80%. The HL on the cam stands for High Letoff (HL) which is your 80%. I will take $35.00 for the one I have. Paypal is moto-116@att.net. Let me know if I can help. Thanks.....

[TMUDDOGG]

Does any other mathews bow use the same cam as the apex 7?i need a 26.5 for my apex 7.can direct me in the right direction.thank you.

[oldandone]

I wish that I could answer that question for you. But I am not sure. Try calling Mathews directly. There should be some tech support that could help.

[Kleck]

I could use a set of 70# limbs for an Ultra Light. I believe they are the same as the Ultra Max, Ultra 2, Feather, Black's, Z's, etc. with 15" limbs. Camo or black, doesn't matter. Paypal discrete is my prefered way to pay. Let me know if you or anyone has them and a price.

Thanks,
K

FYI, they will replace the trebark II 50/60# 15" limbs I have now so they are for sale or trade if anyone is interested. Numbers on limbs are 69.

I'm new here, found this thread through Google and have been having a hard time finding 70# limbs. Sorry if I should not have posted this here.

[Gary3827]

Hello, I'm looking for a Mathews SLHP-BR. Thanks!

[oldandone]

Sorry Gary, I don't have one. Good luck.....

[carterbarrish]

Have been trying to find limbs for my ultra max. I have one with a 60# pull and I need to get this down to about 45lbs or my shoulder will vote x-bow. Thanks. Any one need the 60#'s?

[oldandone]

Sorry, I don't have any 45# limbs. Good luck and thanks for asking........

[firstdiv]

hi i have a mathews q2 bow, need sl2-br, do you have this cam
thanks

[firstdiv]

hi i have a mathews q2 bow need sl2-br, do you have this cam
thanks

[oldandone]

I have a couple of SLC.5 cams RH. If I am correct, I think that these are a 1/2 inch shorter than the SLB cam. Thanks, let me know if I can help. Good luck.......

[Nanouk]

Please send pm again, my message box was full.
/peter