I have a bit of a tuning problem. I have a 2001 Hoyt with command cams. 59# draw weight. 28" arrow CX300. I use a drop away rest and am using a release with a loop. Bare shafts are hitting to the right of fletched which would indicate to weak an arrow however the CX website calculator indicates the 300 or even the 200 could be used. I have adjusted for centershot. Also the bare shafts enter the bale at a different angle than do the fletched shafts. The bare shafts angle of entry looks like they have been shot from left of where I am standing. Help!!!