Archery Forums 3DShoots.com
Find Archery Shoots near you  |   Advertise on 3DShoots.com

Go Back   Archery Forums 3DShoots.com > Archery Forum > Bowhunting forum
 

Reply
 
Thread Tools Display Modes
Old 09-10-2008, 12:23 PM   #1
jds-1
Refuse to Follow !!!
 
jds-1's Avatar
 
Join Date: Feb 2008
Location: Western Washington (Lacey)
Posts: 47
jds-1 is on a distinguished road
Question Whisker buscuit ?

What arrow do you all suggest for a WB rest? I use Goldtip 7595 but they are noisy on drawback. I have heard that the Easton Axis or Beaman ICS Hunter black shaft's are the best for the WB. I am tired of timing issues with all these drop aways. I want something that is easy to set-up, tune and be done with it!

I had just as good results with a WB as I did with my TT Shakey Hunter. I just did not like the noise on drawback so I put the drop away back on.

I shoot a 07' Bowtech Allegiance at #70 and a 28" arrow. I need a arrow that is 420 grains min for state law. I was thinking of the Easton Axis 340 arrow with a 100 grain tip and 3 blazers.

Will I be spined right with this set-up?
jds-1 is offline   Reply With Quote
Old 09-10-2008, 12:30 PM   #2
Werd
Senior Member
 
Werd's Avatar
 
Join Date: Sep 2007
Posts: 1,230
Werd is on a distinguished road
Default

I use carbon express terminator hunters and have no problem with noise on drawback.
__________________
"I have a passion for whitetail deer, not a passion for killing them. The fact that I deer hunt does not make me their enemy, but their guardian."
I play snake
Werd is offline   Reply With Quote
Old 09-10-2008, 04:36 PM   #3
dodgensince74
Guest
 
Posts: n/a
Default

I rub a little bit of arrow wax on my WB and have never had any problems with noise, I use CX maximas and CX maxima hunters.
  Reply With Quote
Old 09-10-2008, 04:55 PM   #4
whitearrow
Bust 'Em
 
Join Date: Sep 2008
Location: philadelphia,ms
Posts: 98
whitearrow is on a distinguished road
Default

you are correct the beman ics or the easton axis are wonderful thru the wb.i also shoot a wb and use axis and there isn't any noise from the rest at draw.i also shoot gold tip pro hunters and i hear a slight rubbing noise because the finish isn't as smooth on a gold tip as the beman ics or axis.
whitearrow->>>------------------>
whitearrow is offline   Reply With Quote
Old 09-10-2008, 05:20 PM   #5
Tenderfoot
Senior Member
 
Join Date: Jul 2008
Posts: 176
Tenderfoot is on a distinguished road
Default reply

You can rub parafin wax into the shafts also. Just keep rubbing with a rag till it is about to catch fire. That'll melt it right into the fibers and make it silent.
Tenderfoot is offline   Reply With Quote
Old 09-10-2008, 07:26 PM   #6
jds-1
Refuse to Follow !!!
 
jds-1's Avatar
 
Join Date: Feb 2008
Location: Western Washington (Lacey)
Posts: 47
jds-1 is on a distinguished road
Default

Quote:
Originally Posted by whitearrow View Post
you are correct the beman ics or the easton axis are wonderful thru the wb.i also shoot a wb and use axis and there isn't any noise from the rest at draw.i also shoot gold tip pro hunters and i hear a slight rubbing noise because the finish isn't as smooth on a gold tip as the beman ics or axis.
whitearrow->>>------------------>
What size buscuit whould you recommend for those shafts? and of the two mentioned which is better? I have to have a 420 grain arrow min. for state law.

I shoot a 70# Bowtech Allegiance and want to use a buscuit with a 28" arrow and 3 blazers and a wrap. Other than price of the two arrows what would be best together to get my 420 grains?
__________________
jds-1 is offline   Reply With Quote
Old 09-10-2008, 08:02 PM   #7
jds-1
Refuse to Follow !!!
 
jds-1's Avatar
 
Join Date: Feb 2008
Location: Western Washington (Lacey)
Posts: 47
jds-1 is on a distinguished road
Default

I need size "small" right?
__________________
jds-1 is offline   Reply With Quote
Old 09-10-2008, 09:15 PM   #8
Tenderfoot
Senior Member
 
Join Date: Jul 2008
Posts: 176
Tenderfoot is on a distinguished road
Default reply

I got regular size, and the shafts fit in there like the manufacturer recomends(A bit lose).
Tenderfoot is offline   Reply With Quote
Old 09-10-2008, 09:31 PM   #9
red44
Senior Member
 
Join Date: Jan 2007
Location: South East Massachusetts
Posts: 2,340
red44 has a spectacular aura aboutred44 has a spectacular aura aboutred44 has a spectacular aura about
Default

I sure as heck would try the wax on the shafts before shelling $$ out for new arrows. You have nothing to lose.
__________________
FBSA Member
red44 is offline   Reply With Quote
Old 09-18-2008, 01:42 AM   #10
whitearrow
Bust 'Em
 
Join Date: Sep 2008
Location: philadelphia,ms
Posts: 98
whitearrow is on a distinguished road
Default

jds, so sorry it took so long to get back to you with an answer but i only get on 3d shoots while at work.but for an answer if you shoot the ics go with the medium size biscuit and if you choose to shoot the acis you can go with the small size biscuit.but,i shoot my axis thru the medium size hole and no problems as i also shoot gold tips some time.if you want a really heavy arrow you might try the easton fmj or the beman mfx line of hit arrows.they are both heavier than the axis or the ics.
hope i helped you out and not too late,
whitearrow->>>--------------------->

Last edited by whitearrow; 09-18-2008 at 01:59 AM.
whitearrow is offline   Reply With Quote
Old 09-18-2008, 06:21 AM   #11
Daniel Boone
Senior Member
 
Daniel Boone's Avatar
 
Join Date: May 2006
Posts: 6,934
Daniel Boone is on a distinguished road
Default Nothing wrong with a bisquit

Whisker does a good job- I put one on my brothers bow.


I shoot the Trophy Taker drop away and really like the drop aways for accuracy. Both will get the job done.
Attached Images
File Type: gif pronghorn.gif (10.5 KB, 70 views)
File Type: jpg Picture 010.jpg (146.5 KB, 70 views)
Daniel Boone is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2004 3DShoots.com