Rest for Aphamax 35?

I love the VT limb driver, but do not like how it works on the Hoyt, it is awkward the way it comes across the Tec riser.

I have a QAD arrow rest on it now, but have not shot it enough to compare it to the limb driver.

If the QAD would be your second choice will go with that, if there is an option better than the QAD may give that a shot.

Thanks

[Daniel Boone]

Make a phone call to the guys at Vapor Trail.

Jarrod and everyone theres really honest and will give you an honest answer.
DB

[asa1485]

I have them on my AM35s. Not sure what you mean by awkward.




I have been in contact with Mike now for sometime trying to get them to work on one for the Hoyt line so that they do not have to sit soo far back. Or if you slide them forward, you do not have an inch or two of the mounting bar sticking off of the front.

Originally Posted by asa1485

I have them on my AM35s. Not sure what you mean by awkward.

The cord coming down from the top goes across the riser, and not straight down to the rest.

I do not have mine on the bow now or I would take a picture. From what I remember it had to cross the cable slide where it met the riser.

I was unable to get the cord to go from limb to rest with out contacting the riser.

[Bowguy]

Look at the Vital Gear Three years and no complaints. Currently on an Alphamax 32.

http://vitalgear.net/Arrow_rests.html

[J.A.G.]

Ive tried the Limbdriver, ended up back with my favorite- NAP Smartrest.. Have one on 3 bows, hubby has them on 2.. They make one special for Hoyts, it's a great rest.

[asa1485]

Originally Posted by dennykyser

The cord coming down from the top goes across the riser, and not straight down to the rest.

I do not have mine on the bow now or I would take a picture. From what I remember it had to cross the cable slide where it met the riser.

I was unable to get the cord to go from limb to rest with out contacting the riser.

It does that on almost all of the bows. The only way to get around it is to make it work with the bottom limbs.