Archery Forums
Find Archery Shoots near you  |   Advertise on

Go Back   Archery Forums > Archery Forum > General Archery Forum

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-14-2010, 09:22 PM   #1
Junior Member
Join Date: Jul 2006
Location: South Louisiana
Posts: 106
OB1.25 is on a distinguished road
Default Perspective on Broadheads

lets start by throwing out the size or material of the ferrule of the broadhead and focus on the blades of the broadhead which do the cutting. i am gonna use a (2in. cut with 2 blades), (1.5in cut with 3 blades) and a (1.125in cut with 4 blades). the 1.125 in is the same as 1-1/8in cut. the size of the blades would always be 1/2 the diameter. here goes

2 inch 2 blade would be 1 inch for each blade = 2 inches of blade.
1.5 inch 3 blade would be .75 inches for each blade = 2.25 inches of blade
1.125 inch 4 blade would be .5625 inches for each blade = 2.25 inches of blade

don't be fooled by the diameter of the cut.

(x2) 2007 Guardians 70# @29in.
GoldTip 5575
Gateway Razor feathers
Limb drivers, HHAs
meanv supressor, TruBall
OB1.25 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2004