Archery Forums 3DShoots.com
Find Archery Shoots near you  |   Advertise on 3DShoots.com

Go Back   Archery Forums 3DShoots.com > Archery Forum > General Archery Forum
 

Reply
 
Thread Tools Display Modes
Old 09-17-2011, 08:40 PM   #1
Southernfryedyankee
Senior Member
 
Southernfryedyankee's Avatar
 
Join Date: Mar 2007
Location: SC
Posts: 955
Southernfryedyankee is on a distinguished road
Default Info for anyone experiencing a metallic vibration from their bow using an HHA sight.

Came across a little piece of metallic remedy for those of you who are shooting their bow with an HHA dial slider or any HHA with a lock knob and micro adjust knob. I found that if you lock the windage adjustment 2 finger locking knob in place and tighten down on the windage adjustment dial itself until snug while the lock knob is engaged it will eliminate the metallic sound from the adjustment knob with the ball bearing when the bow is fired. I was hearing a metallic sound and just could not find out where it was coming from so i took it to my pro shop for a once over and the guy looked it over like 10x tapping different parts of the bow, came to find out that the micro adjustment knob was to loose that it makes a crazy metallic rattle at the end of the shot, we tightened it down and all metallic sound is now gone. I hope this bit of info helps someone :-)
__________________
Her hair glistened in the rain like a nose hair after a sneeze.

http://www.godscountryoutdoors.net
http://http://www.meanvarchery.com/home.html
Southernfryedyankee is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2004 3DShoots.com