String loop & peep sight

[vertigo]

Just wanted to ask the forum what is the best way to keep the train the bowstring to keep the peep site from twisting without useing a bow press?
Also a question to those who use string loop's, do most people use a nock set's on the inside of their string loop's as my loop keep's sliding upward's and I am sure is applying pressure to my nock affecting accuracy.

Thank's in advance for the help.
Vertigo

[vortec 1]

If your peep site is off a little the string loop should put in place.Your string loop is too loose,it should not move, it is your knocking point.Make sure your serving is not turning.Get a new string loop put on to where it position's the peep site perfect to your view.

[vertigo]

So what you are saying is that my string loop is what is causing my peep site to rotate so much so that I am unable to see anything other than the side of it?
My serving is tight enough to where I can't turn it by hand. However the lower portion of the string loop I can slide up or down.

[vortec 1]

Originally Posted by vertigo

So what you are saying is that my string loop is what is causing my peep site to rotate so much so that I am unable to see anything other than the side of it?
My serving is tight enough to where I can't turn it by hand. However the lower portion of the string loop I can slide up or down.

That's what I'm saying.When the D loop is set rite and it's thight the peep site should center when you draw.

[vertigo]

Thank's I'll have to take it to the bow shop and have it changed along with having the draw weight checked.