|
|
| Find Archery Shoots near you | Advertise on 3DShoots.com | |
06-11-2007, 08:49 PM
|
#1 |
|
Junior Member
Join Date: Jun 2007
Posts: 2
 |
Spiral Cams....draw length?
can you change the draw length on the spiral cam bows w/ an allen wrench like you can w/ the cam1 1/2 bows from hoyt in like the 03-05 models im referring to an ultra tec also
|
|
|
|
06-11-2007, 09:21 PM
|
#2 |
|
Administrator
Join Date: May 2004
Posts: 4,074
 |
No you cannot. Spiral cams are draw length specific.
__________________
Chris Christenson - Admin 3DShoots.com - Find Archery Shoots near you ObsessionArchery.com - Archery Supplies |
|
|
|
|
06-12-2007, 08:14 AM
|
#3 |
|
Junior Member
Join Date: Jun 2007
Posts: 2
|
so is there anything else that i can do to change it w/out having to buy new cams, i bought this off of ebay so ill be really dissappointed to have to spend 200 dollars more on cams
|
|
|
|
|
06-12-2007, 11:07 AM
|
#4 |
|
Administrator
Join Date: May 2004
Posts: 4,074
|
You can get fractions of an inch by adjusting the strings and cables. However if you need more than 1/4" adjustment you will make the cam rotation feel terrible.
Call Hoyt and find out what size cam you need and what size strings & cables you need. Then get on here and/or Archerytalk and post the size cams you need. You will probably find them for around $80. Then order up your new strings and cables, if necessary.
__________________
Chris Christenson - Admin 3DShoots.com - Find Archery Shoots near you ObsessionArchery.com - Archery Supplies |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 02:34 PM.