|
|
| Find Archery Shoots near you | Advertise on 3DShoots.com | |
01-04-2009, 10:30 AM
|
#1 |
|
Foam Killer
Join Date: Apr 2008
Posts: 644
 |
GT series 22?
What size Super uni bushing for the Gold tip series 22s? I think it is the 2117 or 2114 but cant rember.
Also what size screw in field tip? 11/32? I cant rember, been a while since I built my last dozen.
__________________
Mathews Ovation 60 lbs 29 Dl- Ranger custom Strings HHA 5500 ol - Trophy Taker shakey hunter- Tru Ball pro diamond- Gold Tip X-cutters= awsome shootin' (new)FBSA Member |
|
|
|
01-04-2009, 04:18 PM
|
#2 |
|
Junior Member
Join Date: Jul 2006
Posts: 8
|
Not sure about the bushing, but you're correct about 11/32 for the field point size. Just built a new dozen of 22's for IBO.
Hope this helps............. |
|
|
|
|
01-04-2009, 04:28 PM
|
#3 |
|
Junior Member
Join Date: Dec 2008
Location: Tennessee
Posts: 5
|
2114 or 2115 bushings will work,22s is what I shoot in 3D with G-nocks,works great.
|
|
|
|
|
01-04-2009, 04:34 PM
|
#4 |
|
Senior Member
Join Date: Sep 2008
Posts: 1,636
 |
Never worried about the uni-bushing... messes up my FOC too much..
Shaft O.D. is 22/64 which is 11/32"
__________________
Mike "Javi" Cooper Last edited by JAVI; 01-04-2009 at 04:38 PM. |
|
|
|
|
01-04-2009, 04:44 PM
|
#5 |
|
Junior Member
Join Date: Dec 2008
Location: Tennessee
Posts: 5
|
I like uni-bushings in the end of my arrows,saves alot of arrows in tourns.
|
|
|
|
|
01-04-2009, 05:17 PM
|
#6 |
|
Vote for Pedro
Join Date: Nov 2007
Location: Greene county N.Y.
Posts: 281
|
Why not use the Gold Tip pin nocks and pins? Provide great protection from rear impacts.
__________________
07 Hoyt 38Ultra 62# 27.5" 06 Hoyt UltraElite 50# 27.5 |
|
|
|
|
01-04-2009, 06:57 PM
|
#7 | |
|
Banned
Join Date: Jul 2007
Location: Missouri
Posts: 1,001
|
Quote:
|
|
|
|
|
|
01-05-2009, 08:39 AM
|
#8 |
|
Foam Killer
Join Date: Apr 2008
Posts: 644
|
Thanks guys. The reason I like the uni bushing is I dont like the GT nocks just a personal thing. I dont like the pin nocks of any type either again personal thing.
1 more question do the mew 22S come with inserts? I know my last set did, but I see them listed in catoluges as no inserts.  Javi- I did a FOC test on the GT web site and with the uni bushings I am still gonna have a FOC of 10.4 to 11.6 with the set up I plan to use. That is way better than what I am getting out of my X-Cutter set up a 8.8 to 9.3 FOC. That is why I am going to switch this year to 22s.
__________________
Mathews Ovation 60 lbs 29 Dl- Ranger custom Strings HHA 5500 ol - Trophy Taker shakey hunter- Tru Ball pro diamond- Gold Tip X-cutters= awsome shootin' (new)FBSA Member |
|
|
|
|
01-05-2009, 06:00 PM
|
#9 |
|
Junior Member
Join Date: Dec 2008
Location: Tennessee
Posts: 5
|
The regular 22s come with inserts and goldtip nocks, the 22 pros most of the time are shafts only.
|
|
|
|
|
01-05-2009, 06:20 PM
|
#10 |
|
Story of my life
Join Date: Oct 2005
Location: N. Illinois
Posts: 851
|
shot pro 22's a couple of years ago and they came with gt nocks and inserts. I shot the pin nocks though. If you need the inserts let me know I will look to see if I still have them
__________________
Target: Hoyt ProElite XT3000 C2, 60# 30", CBE Quad Lite, CBE 3x .019, Trophy Taker, Easton Fatboy 400's(indoor) lightspeed 400 (outdoor) Hunting: 2009 Alphamax35 (Blacked out) 70#, 29", HHA Slider, Bisquit, Easton ACC 3-60, Rage 100 gr. 2 blade |
|
|
|
|
01-06-2009, 09:05 AM
|
#11 |
|
Foam Killer
Join Date: Apr 2008
Posts: 644
|
Thanks guys. I shoot the ultralights. I havent noticed a differance in the pro vrs the ultralight. But I only shoot at 55 yrds max. And for my shooting I dont see a reason to spend the extra money. Also I cut both ends so that helps.
__________________
Mathews Ovation 60 lbs 29 Dl- Ranger custom Strings HHA 5500 ol - Trophy Taker shakey hunter- Tru Ball pro diamond- Gold Tip X-cutters= awsome shootin' (new)FBSA Member |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 01:34 AM.