11-25-2009, 07:03 PM
|
#1
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Shot the 2010 BowTech Destroyer 350 Today!!
I made the trip to a local shop today because I wanted to look over, get my hands on, and shoot the Destroyer and I knew they had a 350 just for that purpose.
When I was handed the Bow I looked it over pretty close. A Sims stabilizer, a regular Hostage rest, D-Loop, Tru-peep, and a 3 pin sight adorned the bow. Not necessarily my choices but it would work well for what it was intended. I immediately noticed the Bow was a 70#er and 29" draw. It also looked to be bottomed out and I thought Ugh!! Too long a draw and 70# (I shoot 60#)
Buddy said the arrows were out in the range and told me to help myself as I had told him I had my own release. The Fit and finish on the bow was very Impressive, as good as I have seen on any bow. The Limbs truly are beautiful with the exposed laminations. These limbs will undoubtedly set a new Standard in compound limbs. No cost was spared as the Best materials were used in these limbs. Also impressive was the Flex roller guard, which moves just enough to do what it is intended to do. After shooting a half dozen arrows I decided to go see what the bow was scaling as I was sure it was not 70#, but a trip to the scale proved I was wrong and it was 70# on the button. Wow!! A 70# speed bow that was an inch too long and still felt relatively smooth! Unbelievable!!
Shooting the 350 for a while only impressed me more and I was grouping arrows very tightly with a bow that was Not setup for me and was an inch too long in draw and 10 more pounds than I am used to shooting. The Bow was very quick (BC said 29", 70#, 350 grain arrow, 341 fps) it was very quiet even in the enclosed shooting lane, and recoil & vibration were virtually nonexistent.
My 1st impressions of this Bow was Wow, Wow!! I really could not find anything that I did not like about this bow. I thought the 32 5/8" A to A would be something I might not like, but it held and shot like a longer Bow. BowTech has hit a Home Run with this Bow No Doubt!!
Now for the Bad part!! I have to wait for my 340 to come in. I probably will have a 350 on order very soon as well.
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
11-25-2009, 10:08 PM
|
#2
|
|
Junior Member
Join Date: Nov 2009
Posts: 4
|
I noticed it say's SE Illinois what town is this shop in I am close to jacksonville
|
|
|
11-25-2009, 10:36 PM
|
#3
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Quote:
Originally Posted by Calvin94
I noticed it say's SE Illinois what town is this shop in I am close to jacksonville
|
They are shipping out, so keep checking the bigger shops around you. If you don't mind the drive you can shoot this one in Marion.
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
11-26-2009, 07:16 AM
|
#4
|
|
Senior Member
Join Date: Sep 2008
Location: Oklahoma
Posts: 1,597
|
I will be checking them out when are dealer gets one I am like dan I want a 340 and 350
__________________
Bowtech Bows, Goldtip, B-Stinger, Trophy Taker, Tru Ball, Axcel
Whistling Wings Guide Service
Bad Boys Bowfishing
|
|
|
11-26-2009, 07:47 AM
|
#5
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Quote:
Originally Posted by hstubblefield
I will be checking them out when are dealer gets one I am like dan I want a 340 and 350
|
They really are that Sweet!!
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
12-01-2009, 12:31 PM
|
#6
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Here's a link to another review!
http://www.archerytalk.com/vb/showthread.php?t=1075284
I'm betting most reviews are going to be very favorable.
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
12-01-2009, 02:44 PM
|
#7
|
|
BOWNUTS
Join Date: Jan 2008
Location: Michigan
Posts: 2,442
|
Good review Dan, Ive been waiting for my local shop to get one in. This bow has been in my mind, cant wait to shoot one.
__________________
I never miss, my arrows always hit something
FBSA STAFF GRILLER
|
|
|
12-01-2009, 05:11 PM
|
#8
|
|
Senior Member
Join Date: Apr 2008
Location: Wisconsin
Posts: 234
|
Quote:
Originally Posted by MeanV2
I thought the 32 5/8" A to A would be something I might not like,
|
Sure would be nice to see a couple more inches there.
|
|
|
03-01-2010, 09:03 PM
|
#9
|
|
Junior Member
Join Date: Jul 2009
Posts: 3
|
Thats what she said
|
|
|
03-01-2010, 09:28 PM
|
#10
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
$1000.00
For the money there asking for that bow.
It better be all that and a bag of chips.
Because this time next year. It will lose lots of value. I have never spent that kind of money on a bow.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-01-2010, 09:37 PM
|
#11
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Selling here for $899
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
03-01-2010, 09:44 PM
|
#12
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
You pay Tax
Quote:
Originally Posted by MeanV2
Selling here for $899
Dan
|
Out the door close to $1000.00. $960.00 here. Not a cheap bow at all.
Archers are buying them here as well. Next year it will $1100.00. Im just not seeing it in all brands.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-01-2010, 09:57 PM
|
#13
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Quote:
Originally Posted by Daniel Boone
Out the door close to $1000.00. $960.00 here. Not a cheap bow at all.
Archers are buying them here as well. Next year it will $1100.00. Im just not seeing it in all brands.
DB
|
You need to find another shop DB! The Mathews, Hoyts, and BowTechs are all priced comparable here. Pretty much $825 to $899
Most guys won't let $50 to $100 choose their bow, but no worries if they do. There are a lot of cheaper bows out there to choose from if that's what someone is looking for. Some of them are pretty darn nice. BowTech/Diamond has bows completely across a wide price range to suit most budgets. I saw where someone posted about Martins for $100 on Ebay.
I don't know though. I didn't take time to go look
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
03-01-2010, 10:02 PM
|
#14
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Money
Quote:
Originally Posted by MeanV2
You need to find another shop DB! The Mathews, Hoyts, and BowTechs are all priced comparable here. Pretty much $825 to $899
Most guys won't let $50 to $100 choose their bow, but no worries if they do. There are a lot of cheaper bows out there to choose from if that's what someone is looking for. Some of them are pretty darn nice. BowTech/Diamond has bows completely across a wide price range to suit most budgets. I saw where someone posted about Martins for $100 on Ebay.
I don't know though. I didn't take time to go look
Dan
|
Some guys just have more money. Good luck with your bow. There $950.00 out the door here. Im happy with my $400.00 or $500.00 used bows.
I can wait a year to try a destroyer if I want one.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-01-2010, 10:13 PM
|
#15
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Quote:
Originally Posted by Daniel Boone
Some guys just have more money. Good luck with your bow. There $950.00 out the door here. Im happy with my $400.00 or $500.00 used bows.
I can wait a year to try a destroyer if I want one.
DB
|
I'm glad they just came down $10
See it takes all kinds and there are bows for everybody!
It's all good!
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
03-01-2010, 10:29 PM
|
#16
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Amen
Quote:
Originally Posted by MeanV2
I'm glad they just came down $10
See it takes all kinds and there are bows for everybody!
It's all good!
Dan
|
Just glad you found the right bow for you.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-01-2010, 10:49 PM
|
#17
|
|
Senior Member
Join Date: Jul 2007
Location: SE Illinois
Posts: 1,162
|
Quote:
Originally Posted by Daniel Boone
Just glad you found the right bow for you.
DB
|
I always Do every Year DB. I have for 40 plus years.
Dan
__________________
Maker of MEANV STRING SUPPRESSORS
MAITLAND BOW DEALER
Dealer for Slick Tricks, Vapor Trail Limb Driver & Strings, HHA sights, Viper Sights, etc.
www.meanvarchery.com
|
|
|
03-02-2010, 07:37 AM
|
#18
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Bowtech Destroyer
May be one of the best selling bows this year.
My dealer has 20 on back order last time I talked.
I tell everyone to shoot what they like. Bowtech makes a good bow.
Several of my buddies shoot them from me telling them about them. There members here and will be glad to tell you the same.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-02-2010, 11:06 AM
|
#19
|
|
Free Tattoos
Join Date: Jul 2007
Location: The land of the awesome - Ohio
Posts: 1,813
|
Quote:
Originally Posted by Daniel Boone
May be one of the best selling bows this year.
My dealer has 20 on back order last time I talked.
I tell everyone to shoot what they like. Bowtech makes a good bow.
Several of my buddies shoot them from me telling them about them. There members here and will be glad to tell you the same.
DB
|
No need for bashing DB.
__________________
Prostaff of whatever DB uses.
|
|
|
03-02-2010, 11:22 AM
|
#20
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Dont report me
Quote:
Originally Posted by Slippy
No need for bashing DB.
|
Im told Im always bashing Bowtech! Thats what Im told. Corporate has me on speed dial.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-02-2010, 12:24 PM
|
#21
|
|
Free Tattoos
Join Date: Jul 2007
Location: The land of the awesome - Ohio
Posts: 1,813
|
Quote:
Originally Posted by Daniel Boone
Im told Im always bashing Bowtech! Thats what Im told. Corporate has me on speed dial.
DB
|
 ....
__________________
Prostaff of whatever DB uses.
|
|
|
03-02-2010, 04:32 PM
|
#22
|
|
Senior Member
Join Date: Sep 2008
Location: Oklahoma
Posts: 1,597
|
Quote:
Originally Posted by Slippy
No need for bashing DB.
|
DB supports bowtech all the way for not shooting them he has never once bashed my bows.
|
|
|
03-02-2010, 05:41 PM
|
#23
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Almost had your Connie bow
Quote:
Originally Posted by hstubblefield
DB supports bowtech all the way for not shooting them he has never once bashed my bows.
|
Thats a darn good bow that consitition.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
03-02-2010, 06:42 PM
|
#24
|
|
Senior Member
Join Date: Sep 2008
Location: Oklahoma
Posts: 1,597
|
Quote:
Originally Posted by Daniel Boone
Thats a darn good bow that consitition.
DB
|
DB you can still borrow it any time
|
|
|
03-03-2010, 05:36 AM
|
#25
|
|
Junior Member
Join Date: Jan 2010
Posts: 2
|
I had the D350. Bow shot good nice and smooth. I just could not shoot it as good as my Monster 7. So i sold it. Monster 7 just holds better to me. I got a Maxxis 35 we will see how that bow does to. Just my opinion.
|
|
|
03-03-2010, 09:54 PM
|
#26
|
|
Senior Member
Join Date: Apr 2008
Location: Wisconsin
Posts: 234
|
I've had my 340 for a couple of weeks now. It actually shoots better than it looks..... if you can believe that
|
|
|
03-04-2010, 11:28 AM
|
#27
|
|
Free Tattoos
Join Date: Jul 2007
Location: The land of the awesome - Ohio
Posts: 1,813
|
Quote:
Originally Posted by MickeyBee
I've had my 340 for a couple of weeks now. It actually shoots better than it looks.....
|
Gosh, I'd hope.
__________________
Prostaff of whatever DB uses.
|
|
|
03-07-2010, 05:48 AM
|
#28
|
|
Senior Member
Join Date: May 2006
Posts: 6,934
|
Bowtech
Notice both my buddies shooting these Bowtechs in this thread in the link
http://www.3dshoots.com/forums/showthread.php?t=29776
I told them both Bowtech makes a good bow! I even found the one for one of them. Imagine that!
Bowtech makes a good bow. I find the right bargain on a Constitution I may own one.
Please forward this on to coperate head qaurters and maybe they will send me one.
DB
__________________
Elite bows, Vortex Binos, Trophy Taker sights, Carter releases, Goldtip Arrows. CBE sights, Vapor Trail Strings, B Stinger stabilizers
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 08:35 PM.
|