Bowtech ata show release??

BuckeyeRed · 11-28-2010, 09:30 PM

I am getting a bit excited for this release... No Center Pivots on site.. Judging by the hidden bow a new CP is on its way with what looks to be Destroyer style cam and preloaded limbs... Good golly if this thing is 335-340 w/ 7"-7.5" BH.......

All that in optifade forest finish...

Make sure you program my cell # into your phone Chris!!!

wilkersonhunter · 11-29-2010, 07:25 AM

Quote:

Originally Posted by BuckeyeRed

I am getting a bit excited for this release... No Center Pivots on site.. Judging by the hidden bow a new CP is on its way with what looks to be Destroyer style cam and preloaded limbs... Good golly if this thing is 335-340 w/ 7"-7.5" BH.......

All that in optifade forest finish...

Make sure you program my cell # into your phone Chris!!!

that owuld be a sweet shooting bow for sure

Mr. Burns · 12-01-2010, 06:07 PM

OHHH!!!! i know what it is!! as well as specs, but the ONLY thing i am saying is the specs the original poster of this wants.. wont be met.. not all of them anyways

Chris · 12-01-2010, 10:12 PM

Well last year, I took some flack for not taking enough pics. I'm not taking that much heat again. Get ready for a tidal wave of pics.

From the pic it looks like a center pivot type of bow but may not be split limb from what I can see in the picture. Yes, it looks like a destroyer style cam.

I'm hoping for an approx 340. As long as they stay at 30" axle-to-axle or above they will have a huge hit on their hands.

thehairlessone! · 12-11-2010, 08:37 PM

should be a hell of a bow. Looking forward to the photos chris!

rick

wilkersonhunter · 12-15-2010, 09:21 AM

i went on there site and cant find any pics of this bow. can you guys help me out?

BuckeyeRed · 12-15-2010, 10:54 AM

Quote:

Originally Posted by wilkersonhunter

i went on there site and cant find any pics of this bow. can you guys help me out?

Here you go. Like was said before, there isn't much to look at now that they put the darker sheet on it but you can still see the profile of it.

http://www.bowtecharchery.com/#/productDisplay

wilkersonhunter · 12-18-2010, 12:24 AM

wonder when the dealers will have the new bow in so we can shoot it

Chris · 12-18-2010, 06:58 PM

I hope they are building a bunch now so we have them readily available after the release.

I've been watching a lot of posts on some other forums and everyone is complaining about how long it is taking to get Mathews, Hoyts, and PSEs.

Could they really be that busy in this economy or they are just behind in getting products out the door?

Chequamegon · 12-18-2010, 07:32 PM

Quote:

Originally Posted by Chris

I hope they are building a bunch now so we have them readily available after the release.

I've been watching a lot of posts on some other forums and everyone is complaining about how long it is taking to get Mathews, Hoyts, and PSEs.

Could they really be that busy in this economy or they are just behind in getting products out the door?

Chris, I don't think the wait time is anything new as we all want things faster every year....but...

In this economy as you have already stated.....the manufacturers are hedging their bets....why stick out their necks and make product before its ordered? Take Mathews for instance, they have introduced 11 new bows, how do they know which one will have the greatest demand?

Chris · 12-18-2010, 09:22 PM

Quote:

Originally Posted by Chequamegon

Take Mathews for instance, they have introduced 11 new bows, how do they know which one will have the greatest demand?

Someone check the crystal ball so I know which mathews to order.

I can't tell if it will be the Xtreme or the Magnum. We've had quite a few ask about the Magnum since it is a 32" bow.

I've had tons asking about the new flagship Bowtech.

Supermag · 12-18-2010, 11:51 PM

Scheels has a ton of the Extremes in but I'd bet that the Magnum will be the one to have. I don't think the Extreme really gains anything in comparison to the original Z7. I'd be fairly comfortable in saying that you could probably not stock any Z9s and be safe (I still don't know what Mathews was thinking when they decided a 30" ATA bow was a good idea for longer DLs).

MeanV2 · 12-23-2010, 10:44 PM

I'd Love to see a 34"/35" A to A but doubt that will happen. It will be a hit none the less.

Dan

Mr. Burns · 12-24-2010, 04:18 AM

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

JC280 · 12-24-2010, 11:19 AM

Quote:

Originally Posted by Mr. Burns

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

I don't know what the specs are but I was assured that some or all of this information was not correct. My buddy won't tell me. I get the wait and see from him.

wilkersonhunter · 12-24-2010, 12:02 PM

Quote:

Originally Posted by Mr. Burns

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

hey burnsy, if thats the case it might just have me taking a hard look at it. but it will take a lot to pry my pse from my hands. lol

Mr. Burns · 12-24-2010, 12:24 PM

Quote:

Originally Posted by JC280

I don't know what the specs are but I was assured that some or all of this information was not correct. My buddy won't tell me. I get the wait and see from him.

I refuse to buy it. I dont like their marketing scheme. i dont go for stuff like that. sit there and show pics of the lower part of the cam and the limb tips and the rest covered under a sheet.. are you kidding me? either show me the whole thing or dont show me anything at all. for some reason, that kind of bothers me. either way, it is what it is. and as i stated, my feeling for some reason is that it will be the hit bow of the year.

BuckeyeRed · 12-24-2010, 05:03 PM

Quote:

Originally Posted by Mr. Burns

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

hmmmmm....if they could do that why wouldn't they have one shooting 350 at 7.5?

I have my doubts

MeanV2 · 12-25-2010, 09:46 AM

Must not take much to bother you!

Dan

Quote:

Originally Posted by Mr. Burns

I refuse to buy it. I dont like their marketing scheme. i dont go for stuff like that. sit there and show pics of the lower part of the cam and the limb tips and the rest covered under a sheet.. are you kidding me? either show me the whole thing or dont show me anything at all. for some reason, that kind of bothers me. either way, it is what it is. and as i stated, my feeling for some reason is that it will be the hit bow of the year.

Mr. Burns · 12-26-2010, 02:11 AM

Quote:

Originally Posted by MeanV2

Must not take much to bother you!

Dan

eh. its just kind of ridiculous i guess. or atleast thats my feeling about it. i dont know.

i know now that i cant afford it now anyways, now that i have to accessorize a specialist and get a new hunting bow, and i know for hunting i want the bowtech assassin, plus i ordered a hoyt CRX target bow last week that i dont have stuff for, so now i am really tapped out.

Daniel Boone · 12-26-2010, 06:33 AM

Looking forward to seeing the new bows.

My understanding Bowtechs going to have an affordable bow to release in the Diamond line.

Razors edge was a big hit for Christmas in my local dealers shop.

DB

wilkersonhunter · 12-26-2010, 07:13 AM

Quote:

Originally Posted by Mr. Burns

eh. its just kind of ridiculous i guess. or atleast thats my feeling about it. i dont know.

i know now that i cant afford it now anyways, now that i have to accessorize a specialist and get a new hunting bow, and i know for hunting i want the bowtech assassin, plus i ordered a hoyt CRX target bow last week that i dont have stuff for, so now i am really tapped out.

Dang burnsy, when you get back into archery you really get back into it!!!

Chris · 12-26-2010, 08:41 AM

I have some of the new Diamond bows up on ObsessionArchery.com
Amazing specs for bows priced this low.

Chris · 12-26-2010, 09:11 AM

Here are some links for you
2011 Diamond Outlaw
2011 Diamond Dead Eye
2011 Diamond Fugitive

wilkersonhunter · 12-26-2010, 11:08 AM

good looking bows for the money

MeanV2 · 12-27-2010, 11:26 AM

They definitely are!!

Dan

Quote:

Originally Posted by wilkersonhunter

good looking bows for the money

MeanV2 · 01-06-2011, 12:31 PM

Looks like your information was Not exactly true Mr. Burns!

Not 34" A to A
Not 362fps
I also think your BH is wrong
You did get a couple things right

Dan

Quote:

Originally Posted by Mr. Burns

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

VNVGUNNER · 01-06-2011, 01:42 PM

Quote:

Originally Posted by Mr. Burns

FINE! here it is!

its called the bowtech invasion
34.125" axle-axle
6 1/2" brace hight
split HARDCORE limbs
overdrive cams
362fps.

and YES, it IS a center pivot.

happy now??

LOL

Bowtech Invasion specs......

brace....7"
Axle to axle......31 1/32"
IBO.....343
Draw lengths 26-30"
Draw weights.....50/60/70/80

Mr. Burns · 01-06-2011, 04:36 PM

i will take one in 80 pounds please!!

VNVGUNNER · 01-06-2011, 04:46 PM

MeanV2 · 01-06-2011, 04:57 PM

X2!!!

Dan

Quote:

Originally Posted by VNVGUNNER