2006 Bowtech Allegiance - Mint and ready to hunt and/or 3D

[Ronhop]

I have a prestine 2006 Bowtech Allegiance, ready to shoot/hunt/3D.

70# limbs
29" mods
Mossy Oak Obsession
Shrewd Custom Grip
Sims Limbsavers and Stab
Newer Ranger String/Control Cables
NAP Quick Tune Micro-Adjust Drop Away Rest
Copper John Deadnuts 2 Competition Dovetail Sight (4 pin)
12 Easton Axis 400 arrows w/100 grain bulge points and new Fusion Vanes and X-Nocks
6 - 100 grain NAP Spitfire broadheads with new blades
3 - 100 grain Spitfires with practice blades
3 Spare sets of new blades
Quickee 6 arrow quiver
Quiver offset mounting bracket (better bow balance, moved quiver to the rear of the bow about 3") - This can easily be removed if you feel that the bow has too much rearward weight.
Brass nock point (I shoot off the string). You can easily add a loop, which I can install for you if you would like.
Free-Flite glove release with Medium and Large Gloves. This was only used 1 season.
Peep (3/16") and new centering tubing.
Spare set of brand new Vapor Trail control cables and string, still in package.
Lakewood products bowfile case - Mossy Oak Camo, with Bowtech Logo

This bow setup is absolutely ready to shoot right out of the box. It has been very well cared for and meticulously tuned.

$700 to your door in lower 48. I will ship to Alaska or Hawaii for actual shipping cost. PM me and we can work something out.

Cashier's Check or Certified Check only. Right now I cannot accept payment on my PayPal account.

PM me, with serious inquiries only, for some great pics. Sizing the pics to fit here do not do them justice.

Because of a relatively serious illness I have been forced to give up hunting.

I am just getting back into the swing of things and am focusing on indoor spots, 3D and Field. So, no, I'm not abandoning the sport. In fact this has been an eye opener since I'm more involved in it than before with working a kids archery booth at the local outdoor show and volunteering for local club events.

I have been a member here a long time and it has been a while since I posted. I'm glad to be back and, to my old buds, feel free to say hello. I'll do my best to catch up with everyone too.

Ron

[Ronhop]

OK I'll bite and knock the price down to $675 TYD in the lower 48.
I'll also throw in a Grayling fletching jig with straight and helical clamps. I have it mounted on a small board with rubber feet so you can easily fletch on any table top. Not only that but I'll throw in a pair of very nice Bausch and Lomb Legacy Gold Ring 7x35 binos with strap. The binos are like new. Sorry but I have no clue where the case went to. I always kept them in a fanny pack wrapped in a hand towel.

Ron

Originally Posted by Ronhop

I have a prestine 2006 Bowtech Allegiance, ready to shoot/hunt/3D.

70# limbs
29" mods
Mossy Oak Obsession
Shrewd Custom Grip
Sims Limbsavers and Stab
Newer Ranger String/Control Cables
NAP Quick Tune Micro-Adjust Drop Away Rest
Copper John Deadnuts 2 Competition Dovetail Sight (4 pin)
12 Easton Axis 400 arrows w/100 grain bulge points and new Fusion Vanes and X-Nocks
6 - 100 grain NAP Spitfire broadheads with new blades
3 - 100 grain Spitfires with practice blades
3 Spare sets of new blades
Quickee 6 arrow quiver
Quiver offset mounting bracket (better bow balance, moved quiver to the rear of the bow about 3") - This can easily be removed if you feel that the bow has too much rearward weight.
Brass nock point (I shoot off the string). You can easily add a loop, which I can install for you if you would like.
Free-Flite glove release with Medium and Large Gloves. This was only used 1 season.
Peep (3/16") and new centering tubing.
Spare set of brand new Vapor Trail control cables and string, still in package.
Lakewood products bowfile case - Mossy Oak Camo, with Bowtech Logo

This bow setup is absolutely ready to shoot right out of the box. It has been very well cared for and meticulously tuned.

$700 to your door in lower 48. I will ship to Alaska or Hawaii for actual shipping cost. PM me and we can work something out.

Cashier's Check or Certified Check only. Right now I cannot accept payment on my PayPal account.

PM me, with serious inquiries only, for some great pics. Sizing the pics to fit here do not do them justice.

Because of a relatively serious illness I have been forced to give up hunting.

I am just getting back into the swing of things and am focusing on indoor spots, 3D and Field. So, no, I'm not abandoning the sport. In fact this has been an eye opener since I'm more involved in it than before with working a kids archery booth at the local outdoor show and volunteering for local club events.

I have been a member here a long time and it has been a while since I posted. I'm glad to be back and, to my old buds, feel free to say hello. I'll do my best to catch up with everyone too.

Ron

[Ronhop]

Ok, here we go again.
I'll do exact package for $600 TYD lower 48.

I'll post pics when I resize them.

This is a very nice setup and ready to go. Nothing else to buy but a stand and camo and the desire to hunt. 3D is always good too, and it's one heck of a lot of fun.

Send me a PM if your interested with your number and I can work with you.

Ron

[Ronhop]

$550 same details and box contents. Anyone want pics send me a pm. Thanks.

Ron

Originally Posted by Ronhop

Ok, here we go again.
I'll do exact package for $600 TYD lower 48.

I'll post pics when I resize them.

This is a very nice setup and ready to go. Nothing else to buy but a stand and camo and the desire to hunt. 3D is always good too, and it's one heck of a lot of fun.

Send me a PM if your interested with your number and I can work with you.

Ron

[Ronhop]

Ok last reduction. $500 tyd lower 48.
Ron

Originally Posted by Ronhop

$550 same details and box contents. Anyone want pics send me a pm. Thanks.

Ron

[Ronhop]

Off the market.
Thanks,
Ron