Bohning Blazer Vanes

[Buckwheat]

I'm just getting started in building my own arrows. I have decided on using an Arizona E-Z Fletcher jig but I'm not sure how well it will work with Blazer vanes. Any information would be greatly appreciated

[Dredly]

Not sure I've never used that particular jig but I like Blazers quite a bit

[Chris]

Blazers work just fine with that jig. I ve been shooting blazers for the last two years for hunting and they work great.

[BowhuntnHoosier]

I love my Blazers a buddy of mine uses that fletcher I think and it works fine. Good luck and show us some pics when you get some done.

[mdewitt71]

I have a Arizona jig and use 2 inch blazers on my Gold Tip arrows.
I buy the 3M super-glue or Loktite gel glue and I have had no bonding issues what so ever, the glue set fast (within 2 minutes) and seems to last alot longer than other glues I have used with lil to no residue.

I did use fletch tite glue (Platinum) and had some bonding issues but not since I switched......

[slamdam]

I use goat tuff with blazer and the e-z fletcher from Arizona. It works awsome. I always make sure I clean the vanes and arrows with alochol first to clean them.

[mdewitt71]

Originally Posted by slamdam

I use goat tuff with blazer and the e-z fletcher from Arizona. It works awsome. I always make sure I clean the vanes and arrows with alochol first to clean them.

Yes, I have heard Goat Tuff works well....
I just saw the price on it and wanted to see if I could find something a lil cheaper and closer than going to a shop or ordering thru the mail.
I think the Loktite for me has worked the best and it runs about $2.29 a bottle and I can do over 2 1/2 dozen arrows with it.

[Dredly]

Goat tuff is the best! only problem is the white residue it leaves on the arrows... looks a bit sloppy.

Its also excellent for inserts.

[Buckwheat]

Thanks for the advice. This makes my purcahse decision alot easier.