Archery Forums
Find Archery Shoots near you  |   Advertise on

Go Back   Archery Forums > Free Classifieds - Used Archery Equipment > Left Handed Archery Classifieds

Thread Tools Display Modes
Old 04-01-2007, 11:01 AM   #1
Junior Member
Join Date: Mar 2007
Posts: 9
Hawkeye is on a distinguished road
Default Looking for Left-Hand Hoyt Redline Cam

I'm looking for a Left-Hand Hoyt Redline cam (number RL4-L-HL OR RL5-L-HL) to fit my Striker II. It currently has an RL7-L-HL but the draw length is too long. If anyone has one, knows where I can find one, wants to trade for one, or has any info that might lead me to one, I would appreciate it !!
Hawkeye is offline   Reply With Quote
Old 04-03-2007, 10:06 PM   #2
Junior Member
Join Date: Aug 2006
Posts: 3
flynnco is on a distinguished road
Default redline cam

MY cam is a left hand cam RL5-L-HO it came off my hoyt viper bow I needed a No.7 to give me a 29 inch draw, on your striker II a NO.7 is a 31 inch draw so a NO.4 is a 28 inch and a NO.5 like mine is a 29 inch draw so the draw length you would have if you put on my NO.5 is 29 inch .This cam will fit your bow but keep in mind the HO is 65% let off and the HL is 75% a little harder to draw back but not that much difference .I already found my NO.7 but if it will help you out and it will work for you let me know and I'll trade you even you mail it to me and vise versa . What is the draw length your trying to get on your bow ? the difference between a NO.4 and a NO.5 is 1 inch and could cause you some problems so its important to acquire the proper draw length . PS let me know and good luck Gary
flynnco is offline   Reply With Quote
Old 11-28-2007, 10:56 PM   #3
Mike Atwell
Junior Member
Join Date: Nov 2007
Location: Oklahoma
Posts: 2
Mike Atwell is on a distinguished road

I don't know if it will work for you or not, but I've got a Redline II cam and idler (R2-5.0L) in silver that I'd sell for $25.00
They came off a 2001 Ultratec with xt3000 limbs & I think the draw length was 30 or 31 inches. Too long for me & I ended up putting on a set of command cams.
Mike Atwell is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2004