Archery Forums 3DShoots.com
Find Archery Shoots near you  |   Advertise on 3DShoots.com

Go Back   Archery Forums 3DShoots.com > Archery Forum > General Archery Forum
 

Reply
 
Thread Tools Display Modes
Old 08-13-2007, 01:31 AM   #1
Viper
Junior Member
 
Join Date: Aug 2007
Posts: 9
Viper is on a distinguished road
Default Golden Eagle Protech

I just picked up a Golden Eagle Protech at a garage sale & can't find any info on them anywhere online. It also says "Realtree Hardwoods" on it. It looks exactly like a bow I saw recently at a Walmart, so I know it's not a high end bow, but can anyone tell me anything about them or where I can find an owners manual for it? Thanks.
Viper is offline   Reply With Quote
Old 08-13-2007, 06:39 AM   #2
Pinwheel1969
#1 THREAD KILLER
 
Pinwheel1969's Avatar
 
Join Date: Mar 2005
Location: at your course..taking your money
Posts: 1,999
Pinwheel1969 is on a distinguished road
Default

you probably wont find any kind of manual. Unless someone has one lying around. Since Golden Eagle isnt around anymore. Try Bear Archery. They bought Golden Eagle out years ago. Maybe they would have one! Good luck!
__________________
I would like to thank all my sponsers:Alpine Archery Pro Staff, Tru-Ball Releases Staff , Hydronics Archery Pro Staff,Victory Arrows Staff, Bohning Archery , Vibra-Check , TP Scope Lenses Pro Staff, Mossy Oak Pro Staff....
RANGER BOW STRINGS
Pinwheel1969 is offline   Reply With Quote
Old 08-13-2007, 08:04 AM   #3
Viper
Junior Member
 
Join Date: Aug 2007
Posts: 9
Viper is on a distinguished road
Default

Thanks Pinwheel - I'll see what Bear can tell me.
Viper is offline   Reply With Quote
Old 08-14-2007, 12:54 AM   #4
Viper
Junior Member
 
Join Date: Aug 2007
Posts: 9
Viper is on a distinguished road
Default

Bear replied back that they have no manuals available for this bow. Does anyone know a shop or an individual that used to deal in Golden Eagle equipment that might have some old cams sitting around? I need to adjust the 29" DL down to 26 1/2" & also adjust the DW down a bit from 70#. Any tips would be greatly appreciated. Thanks.
Viper is offline   Reply With Quote
Old 08-14-2007, 06:18 AM   #5
Pinwheel1969
#1 THREAD KILLER
 
Pinwheel1969's Avatar
 
Join Date: Mar 2005
Location: at your course..taking your money
Posts: 1,999
Pinwheel1969 is on a distinguished road
Default

I know Gander Mountain carried them up until they went out of buisness. Maybe they might have some thing lying around?
__________________
I would like to thank all my sponsers:Alpine Archery Pro Staff, Tru-Ball Releases Staff , Hydronics Archery Pro Staff,Victory Arrows Staff, Bohning Archery , Vibra-Check , TP Scope Lenses Pro Staff, Mossy Oak Pro Staff....
RANGER BOW STRINGS
Pinwheel1969 is offline   Reply With Quote
Old 08-14-2007, 01:48 PM   #6
tek
Senior Member
 
Join Date: Nov 2006
Posts: 220
tek is on a distinguished road
Default

I have some old Golden Eagle catalogs. Do you know what year the bow is and are you sure is says Protech?

Also, look at the cams and see if there are any letters or numbers on them, I used to have some modules for some of the dual cammed bows.
tek is offline   Reply With Quote
Old 08-15-2007, 01:16 AM   #7
Viper
Junior Member
 
Join Date: Aug 2007
Posts: 9
Viper is on a distinguished road
Default

Thanks Tek. Yes it says GOLDEN EAGLE on one of the upper limbs & ProTech on the other upper limb. One of the cams has the # 16244 on it. That's the only numbers or letters I could find on either cam. Does that help?
Viper is offline   Reply With Quote
Old 08-15-2007, 07:53 AM   #8
tek
Senior Member
 
Join Date: Nov 2006
Posts: 220
tek is on a distinguished road
Default

I will check today and see what I have. But I dont remember ever seeing a GE Protech. And I will see if I have any modules left for Golden Eagles, they had many different cams.
tek is offline   Reply With Quote
Old 08-15-2007, 08:36 AM   #9
tek
Senior Member
 
Join Date: Nov 2006
Posts: 220
tek is on a distinguished road
Default

Here is what I have.

Dual cam modules, H2, H3, H4, H5, H6 these are GE metal modules

X2, X3, X4, plastic modules for GE, dual cams

2,3,4, in very tiny numbers on the metal cams for GE, dual cams

Single cams, sgh, sfh, sdh

PWC cams, w2, w5, w6

I found 8 years of GE catalogs and no Protech in them so I doubt if any of this helps you. If you need any of these modules I will send them to you free.
tek is offline   Reply With Quote
Old 08-15-2007, 09:03 PM   #10
Viper
Junior Member
 
Join Date: Aug 2007
Posts: 9
Viper is on a distinguished road
Default

Tek - Here are a few pix if it will help. http://www.burtisfamily.net/4801.html
Viper is offline   Reply With Quote
Old 08-15-2007, 11:27 PM   #11
tek
Senior Member
 
Join Date: Nov 2006
Posts: 220
tek is on a distinguished road
Default

The modules I have are for hard cam bows, they will not work on your bow.

I dont know for sure but that may be a bow that was sold only to box stores. I think GE started using the bear/jenning limbs around 1999 or 2000.

If you can, try to find a Bear/Jennings dealer, they maybe able to help you.
tek is offline   Reply With Quote
Old 01-21-2008, 09:25 AM   #12
C Williams
Junior Member
 
Join Date: Jan 2008
Posts: 1
C Williams is on a distinguished road
Default #16244

I have a bear deerhunter bow with the same numbers on both cams
C Williams is offline   Reply With Quote
Old 04-23-2012, 08:05 PM   #13
sam75
Junior Member
 
Join Date: Apr 2012
Posts: 1
sam75 is on a distinguished road
Default manual and X-2 draw modules for G.E. sparrowhawk

Quote:
Originally Posted by tek View Post
Here is what I have.

Dual cam modules, H2, H3, H4, H5, H6 these are GE metal modules

X2, X3, X4, plastic modules for GE, dual cams

2,3,4, in very tiny numbers on the metal cams for GE, dual cams

Single cams, sgh, sfh, sdh

PWC cams, w2, w5, w6

I found 8 years of GE catalogs and no Protech in them so I doubt if any of this helps you. If you need any of these modules I will send them to you free.
if you are still active and happen to get this message on this rather old thread,and have either the manual or the x-2 draw modules
for the sparrowhawk, i will be most happy to pay for them
thanks
sam
sam75 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2004 3DShoots.com