Release Screw...

Discussion in 'General Archery Forum' started by Wheely, Feb 6, 2008.

  1. Wheely

    Wheely Wheely Threads

    5,611
    12
    0
    I have a TruBall Pro Diamond (or somthing like that)

    Anyway, the little screw that adjusts the trigger sensitivity keeps coming loose. I have almost lost it a couple times. What can I do to keep it in place?

    Should I glue it so it never moves again or is there something that will just keep it from turning when I don't want it to?
     
  2. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    put a drop of thread loc for plumbing on there, it comes in a big tube......will do about 10000 release screws
     

  3. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    Wheely they make a product called removable lock tight. you just take the screw out squirt the loctight on the threads and put it back in the release. Just make sure when you put it back it's where you want the release adjusted at. When it dries it won't let the screw come back out but you should be able to break it loose if you need to later with a wrench. Another thing you could try is take the screw out and wrap the threads with teflon plumbers tape. Just make sure to wrap in the same direction as the threads and put the screw back in..... Good Luck...:peace:
     
  4. Wheely

    Wheely Wheely Threads

    5,611
    12
    0
    Do you have any idea how small this screw is :doh: :laugh: :laugh:
     
  5. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    I could wrap a needle with teflon tape.....:noidea: Go get your husband to do it..:doh: :doh:
     
  6. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    dip the tip of your allen key in a tiny amount of vaseline and it will hold the screw for you.........:rockon:
     
  7. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    :tape: :tape: :tape: :tape:
     
  8. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    I was being serious..........dork fish:cool:
     
  9. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    SO was I....:tape: :tape: :tape:
     
  10. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    whatever:wave: :wave:
     
  11. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    I was just saying....:noidea:
     
  12. BowhuntnHoosier

    BowhuntnHoosier Bisquit.......

    13,887
    15
    0
    Loc-tite.......works like a charm.:rockon:
     
  13. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    Anybody wanna take bets that she looses that screw before she get's it back in the release?...:noidea: :noidea:
     
  14. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    she is busy pushing the ban button:laugh: :laugh: :laugh:
     
  15. Wheely

    Wheely Wheely Threads

    5,611
    12
    0
    :doh: I might not screw it straight into it's hole, but I won't lose it :p
     
  16. BowhuntnHoosier

    BowhuntnHoosier Bisquit.......

    13,887
    15
    0
    Simply turn the screw as if you are taking it out before trying to thread it in. You will feel it drop in where it should be.:rockon:
     
  17. BUNNYMAN

    BUNNYMAN I pray for you!

    29,903
    12
    0
    do you have that problem often???:laugh: :laugh:
     
  18. Wheely

    Wheely Wheely Threads

    5,611
    12
    0
    Thanks for the info :doh: I might be a girl, but I know how to screw it :p
     
  19. bullfiddle

    bullfiddle Movin on up!!!

    11,308
    1
    0
    :whistle: :whistle: :spit: :spit: :faint2: :faint2:
     
  20. :tape: :tape: :tape: :tape: :tape: