Bow Custom SIDEPLATES for Hoyt bows, 2004-11.

Discussion in 'Archery Equipment Accessories - Buy Sell Trade' started by Bigdog1, Feb 16, 2011.

  1. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    re the Sidplates I have on hand to fit Hoyt bows from 2004 through 2011. If your bow has the handle integrated into the riser, such as the Elite Series, these will not fit. THESE WILL FIT ALL OTHERS!
    Any without mounting holes come with two UGlu strips for mounting to your riser. UGlu is a new industrial strength glue strip, similar to double sided tape but much thinner and stronger. It works very well and the sideplates can be removed without damaging the riser or the sideplates by inserting a thin blade between the sideplate and riser and prying gently upward.
     
    Last edited: Feb 16, 2011
  2. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    This set is made from Zebrawood, $41 shipped
     

  3. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    Amboyna Burl, $41 shipped
     
  4. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    Two sets of walnut, $36 each, shipped
     
  5. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    Quilted Sapele, $76 shipped. These are absolutely holographic! This wood is used for very expensive guitar and stringed instrument necks.
     
  6. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    This set is made from African Wenge, $41 shipped.
     
  7. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    These are made from Buckeye Burl from California, $56 each, shipped.
     
  8. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    Two sets of Bocote sideplates, $46 each (ONE ON LEFT HAS BEEN SOLD!)
     
  9. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    The Wenge plates have been sold, but I can make you a set! Just ask!
     
  10. Bigdog1

    Bigdog1 The Custom Sideplate Man

    87
    0
    0
    My plates with the mounting holes will not fit the Hoyt carbon fiber bows, however the sideplates without the mounting holes will fit perfectly. The problem is Hoyt has offset the holes on the two sides.