Gold Tip 30X or Target Arrows

Discussion in 'Bowhunting forum' started by switchyhuntr, Feb 24, 2006.

  1. switchyhuntr

    switchyhuntr Junior Member

    16
    0
    0
    can you or do you use them for hunting deer.
    how do they perform:noidea:
     
  2. Darrel

    Darrel Member

    71
    0
    0
    If you have inserts for them I don't see why your couldn't. I don't know it inserts are avaliable for the 30X's but you can use 2514 inserts in them. X-cutters use 2413 inserts.

    Darrel
     

  3. switchyhuntr

    switchyhuntr Junior Member

    16
    0
    0
    thanx i'll get me some and try them out
    puttin' blazers on them

    possibly gettin' some ted nugent edition gold tip
    arrows also be puttin' blazers on them to
     
  4. Darrel

    Darrel Member

    71
    0
    0
    With large arrows like the X-Cutters and 30X pros you have to watch fletching clearance when using Blazer vanes. The balzers are taller than standard vanes.

    Darrel
     
  5. Chris

    Chris Administrator Staff Member

    4,078
    5
    38
    I agree with Darrell, blazers may be a problem on a shaft that fat. I shoot feathers on my 30x shafts. I don't have to worry about contact.
     
  6. CSS Shooter

    CSS Shooter Senior Member

    424
    0
    0
    Guys I may be mistaken but I think that the X-cutter and the X30's were designed strictly for indoor use only. Not to be hunted with. But I don know I have shot one of the X-cutters through a 3/4 inch piece of OSB and it didn't hurt the shaft. I was working w/ my new back tension release and didn't have it set strong enough. Result one hole in my sheet of safety wood.
     
  7. CSS Shooter

    CSS Shooter Senior Member

    424
    0
    0
    X-cutters

    I know you can use the X-cutters for 3-D.