Sorry, do not have pictures yet. But here is what we have heard so far. The Fast/Smooth indication is the type of module on the bow. Tribute IBO Speed (Fast):320-328fps IBO Speed (Smooth):312-320 ATA Length:31.5" Brace Height:7.5" Draw Lengths:26-30" Draw Weights:40-100# Bow Weight:4.1 lbs Allegiance IBO Speed(Fast): 327-335fps IBO Speed (Smooth): 319-327 ATA Length: 34" Brace Height: 7" Draw Lengths: 26-30" Draw Weights: 40-70# Bow Weight: 4.1 lbs Equalizer IBO Speed(Fast): 294-302fps IBO Speed (Smooth) N/A ATA Length: 32.125" Brace Height: 7" Draw Lengths: 23-26.5" Draw Weights: 20-60# Bow Weight: 3.5lbs Old Glory IBO Speed(Fast): 308-316 fps IBO Speed (Smooth) 300-308 fps ATA Length: 37" Brace Height: 8" Draw Lengths: 28-32" Draw Weights: 40-70# Bow Weight: 4.3 lbs. Constitution IBO Speed(Fast): 308-316 fps IBO Speed (Smooth) N/A ATA Length: 40" Brace Height: 8.25" Draw Lengths: 26.5-30" Draw Weights: 30-70# Bow Weight: 4.5 lbs Tomkat IBO Speed(Fast): 307-315 fps IBO Speed (Smooth): 299-307 fps ATA Length: 31.75" Brace Height: 8.625 Draw Lengths: 27-31" Draw Weights: 40-70# Bow Weight: 3.8lbs
I cant wait to see some pictures of these things, i have been waiting for the 06's to come out. Also what is with the two cams, fast and smooth. Did they design all new cams, or what. I know that the 05's have a hard pull, so it would be nice if they made it a little easier. If you got anymore info i would love to know more about the 06 bows. Thanks
The cam didn't change except there is a now a module that can be changed. Smooth or Fast. The Fast should be 8-10fps faster than the 2005 bows. I haven't heard much else that has changed so we will have to wait until Nov 1st to hear the whole story.
I talked to my Bowtech rep yesterday. I found some of the new bows very interesting. The short draw bow, the Equalizer has some interesting specs. This bow has a max draw lenght of 26.5" and a top speed of 302fps. My rep stated that IF this bow would go to 30" draw it would shoot 360fps. The other bow is the tribute. the limbs on this bow are past parallel. The riser is the allegiance riser. I was told it shoots like a longer axle bow and is pin point accurate. He said this will be the hot seller this year. The old glory has a larger brace height and even more speed. What more could you ask for in a 3D rig.
Chris, I was told by a bowtech rep that it is a new cam and that it will not work on the 2005 bows, he said the axle pivot point was different and that you would need new limbs, I then looked at the pictures on their website and it looks like thr riser cutouts and the limb pockets are different, I quess the modules also adjust draw legnth, so its no longer cam specific for draw legnth, the tribute looks like a nice bow, I wonder if it will shoot as good as they say for guys with longer draw lengths, I bought an outback 30 inch draw and I couldn't shoot it very well, I shot a legacy before that and now I shoot the allegiance, both around 34 inch axle to axle and I shoot it pretty well, so I wonder if I would run into the same problem with the tribute, let me know what you think, and if you have heard anything different from your rep, thanks.
