What size Aiming Dot for 3D?

Discussion in 'General Archery Forum' started by ptcruz421, Jun 18, 2004.

  1. ptcruz421

    ptcruz421 Member

    72
    0
    0
    Ok since there is a scope discussion going on...

    What sized aiming DOT should I use for 3D?

    Also what size power in my scope and will I need a clarifier?
     
  2. boomhower

    boomhower Junior Member

    7
    0
    0
    its up to you

    hello the size and power you will have to play with them to find out what wroks best for your eyes. every body i shoot with likes 3 and 4 powers and some use stikers and some use fiber optic. it is up to your eyes.and for a clearifires are not such a good idea for 3d because they are not needed for scopes with 4x and under and very hard to keep dry and clean.
     

  3. ptcruz421

    ptcruz421 Member

    72
    0
    0
    I have heard of some using fibers as small as .010 which is really tiny thats why I asked.
     
  4. Paarcher

    Paarcher Junior Member

    9
    0
    0
    I use a .019 fiber optics pin in a hha single pin sight. I currently dont use a magnifier on the sight since my shooting partner is still shootin 3 pin setup. It wouldnt seem fare.
     
  5. Hook Em

    Hook Em Slippy for President

    1,938
    0
    0
    I don't have a dot on my scope...just a circle on the lens.
     
  6. Jay Are

    Jay Are Junior Member

    1,403
    4
    0
    I have a 4 power lense on a HHA scope --- pin size .019. For the longest time I didn't use a clarifier on my peep, but I recently put one in and it made a huge difference for me.

    But, I think like allot of things in archery, it's all trial and error to figure out what works best for you.:noidea: